Operator's Manual
Use this chart as a checklist to assure all parts necessary for assembly have been received. Without these
parts, total setĆup cannot be completed. Some parts may have already been assembled at factory.
Fenders-Rear 2
Capscrew 5/16-18 x 1" lg. 4
Flatwasher .344" I.D. 4
Locknut 5/16-18 4
Capscrew 1/4-20 x 1" lg. 12 Mount rear fenders
Flatwasher .281" I.D. 12
Locknut 1/4-20 12
Trusshead Screw 6
Locknut 3/8-16 6
Wheel Nut 10
Wheel-Front 2
Wheel Nut 10 Mount wheels.
Wheel-Rear 2
Steering wheel 1
Foam Seal 1
Washer 1 Install steering wheel
Nut 1
Cap 1
Fenders-Front 2
Phillips Screw 10-24 14 Install front fenders
Washer 14
Locknut 10-24 14
Seat Frame 1
Seat Frame Bracket 2
Carriage Bolts 3/8-16 x 3/4" lg. 4 Install seat frame
Flange Locknut 3/8-16 4
Capscrew 1/2-13 x 1" lg. 2
Locknut 1/2-13 2
Capscrew 3/8-16 x 1" lg. 2
Lockwasher 3/8-16 2
Seat Back Cushion 2
Seat Back Bracket 4
Capscrew 1/4-20 x 3/4" lg. 8
Washer 1/4" 8 Install seat back cushion and manual tube
Carriage Bolts 5/16-18 x 5/8" lg. 8
Flange Locknuts 5/16-18 8
Manual Tube 1
R-Clamp 2
ROPS 1
Capscrew 1/2-13 x 3" lg. 4 Mount ROPS
Locknuts 1/2-13 4
Operator's Manual (Vehicle) 2 Read before operating machine.
Parts Catalog 1
Registration Card 1 Fill out and return to Toro