Service Bulletin

Customer Service Bulletin
Commercial Business Group
Workman
®
3000/4000 Vehicles November 6, 2006
Model/Serial Range: Model Number: Serial Numbers:
Workman 3100 07210 / 07214 40001-230999999
Workman 3120/3220 07232 / 07231 90001-99999
Workman 3200 07200 / 07200TC / 07202 30001-210999999
Workman 3200 07211 / 07211TC / 07212 220000001-230999999
Workman 3210 07220 90001-210999999
Workman 3300-D 07205 / 07205TC 30001-210999999
Workman 3300-D 07213 / 07213TC 220000001-230999999
Workman 3310-D 07222 80001-200999999
Workman 3320-D 07230 90001-99999
Workman 3420 07233 90001-99999
Workman 4200 07216/07218 50001-230999999
Workman 4300-D 07215 / 07215TC 50001-210999999
Workman 4300-D 07217 / 07217TC 220000001-230999999
Subject: Deformed and Cracked Seat Base
The seat base may deform over time and cause the fender to separate from the
mounting surface. Reinforcement Plate (107-7952-03) is now available and may be
added to the inside of the seat base to draw the area flat. Even if some damage to the
seat base is present, the clamping force of the assembly and the remaining integrity of
the seat base will be sufficient to salvage the seat base. Screw (3250-23) is suggested
to replace the existing screws, as it is slightly longer to accommodate the thickness of
the added plate and eases assembly of the warped parts. The picture below highlights
the area involved.
Plate (107-7952-03)
Screw (3250-23)
Ref. V02-04 Copyright 2006 The Toro Company