Service Manual

20. Loosen capscrews (Item 1) and remove nut (Item 2)
with washer. Separate P.T.O. cover (Item 3) or P.T.O.
and O–ring from transaxle case. Inspect P.T.O. cover for
cracks or damage and replace if necessary.
1
3
2
Figure 54
21. Remove oil cap (Item 1) and O–ring from transaxle
case if necessary
.
22. Remove air breather (Item 2) if necessary.
21
Figure 55
23. Loosen capscrews (Item 1) and remove upper cover
(Item 2) from transaxle case.
1
2
Figure 56
Drive Train
Workman 3000/4000 Series Page 6 – 27 Drive Train