Service Manual

WORKMAN 3100 and 3120 Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Maintenance Procedure
Check Battery Fluid Level
Check Battery Cable Connections
Lubricate Engine Prefilter
 Change Engine Oil and Filter
Lubricate All Grease Fittings
Remove Engine Shrouds and Clean Fins
 Check Cable Adjustments

Replace Air Filter
Check Engine RPM (Idle and Full Throttle)

Check Front Wheel Alignment
Inspect Service and Parking Brakes
Inspect Fuel Lines
Replace Fuel Filter

Pack Front Wheel Bearings
Replace Spark Plugs
 Initial break in at 5 hours
 Initial break in at 10 hours
Replace all Interlock Switches
Change Brake Fluid
Every
50hrs
Every
100hrs
Every
200hrs
Every
400hrs
Every
800hrs
Maintenance Interval & Service
Annual Recommendations:
Items listed are recommended every 1200
hours or 2 years, whichever occurs first.
B Level
Service
C Level
Service
D Level
Service
E Level
Service
A Level
Service
Inspect Condition and Wear of Tires
Check Pump Drive Belt Tension
Torque Wheel Lug Nuts
Replace Transaxle Filter
Change Transaxle Oil
Clean Transaxle Strainer
Drain/Flush Fuel Tank
(See Operator’s and Service Manual for specifications an procedures)
Product Records and Maintenance Page 2
– 12
Rev. D
Workman 3000/4000 Series