Service Manual

RemovingtheGearBoxAssembly(continued)
3.Removethedriveshield.
g330867
Figure91
1.5/16–18X5/8inchsquareheadsetscrew4.Reelshaft
2.Inputshaftassembly5.Weldsideofreelsupportplate
3.Groomergearboxassembly
6.Prybar
4.Installa5/16–18X5/8inchsquareheadsetscrew(Torop/n1-803022)inthe
endofthedriveshaftandtightento13N·m(120in-lb);refertoFigure91.
5.Removethecotterpinandclevispinfromtheheightadjustmentrodatthe
frontofthegroomergearbox.Discardthecotterpin.
6.Tipupthecuttingunittoaccessthebottomofthereeltoremovethedrive
shaftassembly.
7.Insertalong-handledprybar(3/8x12inchwithscrewdriverhandle
recommended)throughthebottomofthecuttingunit.Theprybarshould
passbetweenthetopofthereelshaftandthebacksofthereelbladesso
thatthereelwillnotmove.
IMPORTANT
Toavoidgrindingthereel,donotcontactthecuttingedgeofany
bladewiththeprybarasthismaydamagethecuttingedgeand/or
causeahighblade.
8.Movetheprybaragainsttheweldsideofthereelsupportplateclosestto
thegroomergearbox.
IMPORTANT
Youmustusea6-pointsocketwithaheavywalltoremovethegear
boxfromthereel.Donotuseanimpactwrench.Groomergear
boxesinstalledontherightsideofthecuttingunituseastandard
righthandthread;turnthedriveshaftcounterclockwisetoremove
thegearbox.
Greensmaster
®
1018/1021/1026
Page9–5
UniversalGroomer(Optional):ServiceandRepairs
18238SLRevC