Operator's Manual

LOWERDELAY
Controlsthelowerdelayfor
thecentercuttingunit.
TAPOFFDELAY
Controlsthetap-offdelay.
REELSPEEDControlsthereelspeed.
BACKLAPRPM
Controlsthebacklaprpm
speed.
CLIPCONTROL
Turnstheautomatic
clip-controlfeatureON/OFF.
BLADECOUNTSetthenumberofbladesin
eachreel.Thissettingisonly
necessaryifCLIPCONTROLis
settoON.
CLIP(FOC)Setsthedesiredclip.This
settingisonlynecessaryif
CLIPCONTROLissettoON.
ABOUT
MenuItemDescription
MODEL
Liststhemodelnumberofthe
machine.
SNListstheserialnumberofthe
machine.
TEC5001Liststhesoftwarerevisionof
themastercontroller.
INFOCENTERListsthesoftwarerevisionof
theInfoCenter.
CU1Liststhesoftwarerevisionof
therstcuttingunit.
CU2Liststhesoftwarerevisionof
thesecondcuttingunit.
CU3Listthesoftwarerevisionof
thethirdcuttingunit.
GENERATORListstheserialnumberofthe
generator.
CANBUS
Liststhemachine
communicationbusstatus.
AdjustingtheCenterCuttingUnitRaise/LowerDelay
Adjusttheraiseandlowerdelaytimeforthecenter
cuttingwiththeInfoCenter,asdesiredfrom1to10
accordingtothetablebelow.Thefactorydefault
settingis6(375ms)andisoptimizedfora3.8mph
mowspeed.
IncrementNumber
DelayTime(Seconds)
10.100
20.150
30.200
40.250
5
0.300
60.375
7
0.475
80.600
90.750
100.925
AdjustingtheTap-offDelay
Thetap-offdelayfeatureallowsthecuttingunitsto
turnoffwithoutraising,andyoumayadjustitwith
theInfoCenter.Thedelaysettingrepresentsthe
maximumtimefortheraise/lowerjoysticktoremainin
theraisepositiontoactivatethisfeature.Thefactory
defaultsettingis1whichdisablesthisfeature.
IncrementNumber
DelayTime(Seconds)
1
Off
20.050
30.100
40.150
5
0.200
60.250
7
0.300
80.350
90.400
100.450
SettingtheClip-ControlFeature
Toachieveaconsistent,highquality-of-cutanda
uniformaftercutappearance,themachinehasa
clip-controlfeaturethatvariesthespeedofthereels
withthespeedofthemachine,tomaintainaconstant
clip.ThisfeatureisOFFbydefault;congureitand
turnitONasfollows:
1.FromtheSETTINGSmenu,selectCLIPCONTROL.
2.SetCLIPCONTROLtoON.
3.FromtheSETTINGSmenu,selectBLADECOUNT.
4.SettheBLADECOUNTtomatchthenumberof
bladesineachofyourreels.
5.FromtheSETTINGSmenu,selectCLIP(FOC)
6.SetCLIP(FOC)tothedesiredclipsetting.
SettingtheReelSpeed
Theclip-controlfeatureautomaticallysetsthereel
speedtomatchthemachinespeed.Ifyouchoose
nottousetheclip-controlfeature,setthereelspeed
manuallyasfollows:
1.Selecttheheight-of-cutatwhichthecuttingunits
areset.
2.Choosethedesiredgroundspeedbestsuited
forconditions.
20