Service Bulletin

Toro Customer Bulletin GR #17-02 Page 7 of 7
Universal Groomer Updates Greens Mowers June 15, 2018
6. For proper safety, prevent the reel from rotating by blocking the cutting
reel with a piece of wood near one of the reel spiders. Slide shaft drive
removal tool (137-0920) (Figure 8) over the shaft so the flats on the input
shaft and the flats on the socket align. Using 1½ inch box end wrench,
remove the groomer drive shaft from the cutting unit.
Important: With gear box installed on right-hand side of cutting unit, turn
groomer drive counter-clockwise to remove drive-box shaft from cutting
unit.
Important: With gear box installed on left-hand side of cutting unit, turn
groomer drive clockwise (left-hand thread) to remove drive-box shaft
from cutting unit.
Figure 8
Tool-Adapter, Wrench, 137-0921 (Figure 9) holds the driveshaft assembly
when installing and torqueing adapter.
Figure 9