Operator's Manual

14
Figure 9
1. Fuel tank cap
Check the Hydraulic System
The hydraulic system is designed to operate on anti-
wear hydraulic fluid. The machine’s reservoir is filled
at the factory with 8.5 gallons (32.2 l) of Mobil 15M
hydraulic fluid. Check the level of hydraulic fluid
before the engine is first started and daily
thereafter.
Group 1 Hydraulic Fluid (Moderate climate—
average duty)
Note: The fluids within this group are
interchangeable.
ISO VG 46/48 multi-viscosity anti-wear hydraulic
fluid
Mobil DTE 15M
Amoco Rycon Premium ISO 46
Castrol AWH 46
Conoco Hydroclear AW MV68
Gulf Harmony HVI 46 AW
Kendall Hyken Golden MV SAE 5W-20
Pennzbell AWX MV46
Phillips Magnus A KV 5W-20
Shell Tellus T 46
Sunoco Sun Hyd. Oil 2105
Texaco Rando HDZ 46
Universal Tractor Hydraulic Fluid
Mobil Mobilfluid 424
Amoco 1000 Fluid
Chevron Tractor Hydraulic Fluid
Conoco Hydroclear Powertran
Esso Hydraul
Gulf Universal Tractor Fluid
Kendall Hyken 052
Marathon Marafluid Super HT
Pennzoil Hydra-trans
Phillips HG Fluid
Shell Donax TD
76 Lubricants Hydraulic/Tractor Fluid
Sunoco TH Fluid
Texaco TDH
Group 2 Hydraulic Fluid (Hot Climate—Heavy
Duty)
Note: The fluids within this group are
interchangeable.
ISO VG 68 anti-wear hydraulic fluid
Mobil DTE 26
Amoco Rykon AW No. 68
Castrol AWS 68
Chevron Hydraulic Oil AW ISO 68
Conoco Hydroclear AW 68
Exxon Nuto H 68
Gulf Harmony 68AW
Kendall Four Seasons AW68
Marathon ISO 68
Pennzoil IAW Hydraulic Oil 68
Phillips Magnus A ISO 68
Shell Tellus 68
76 Lubricants AW 68
Sunoco SunVis 868
Texaco Rando HD 68
Group 1 fluids are recommended for use
at typical ambient temperatures of 0°C to 41°C. The
ISO type 46/68 fluid has been found to offer optimal
performance in a wide range of temperature
conditions for the average user. The Universal Tractor
Fluids offer similar performance for those who prefer
them, with perhaps some slight loss of efficiency at
high ambient temperatures compared with the Type
46/48 fluids
Group 2 fluids are recommended for heavy-duty
use in hot climates where ambient temperatures
range from about 20°C to 49°C. Use at lower
ambient temperatures may result in hard starting,
increased engine laboring while cold, sluggish or
non-operating spool valves while cold and high
Important
1