Operator's Manual
%$*')%$ Conforms to ANSI B71 .4 - 1990
specifications. Tricycle vehicle with front two wheels
providing drive and rear wheel providing steering.
Operator sits in center over No. 1 cutting unit with No. 2
& 3 cutting units in front of vehicle.
%,' 4-cycle gasoline engine, electric start, with
output of 16 H.P. @ 3600 RPM. Maximum no load
governed engine speed is 2850 RPM.
')%$ All hydraulic drive, consisting of multiple
stack pump, valve and two orbital gear motors to drive
front wheels.
*))$ $)(: All hydraulic drive consisting of three
gear pump sections, three valve sections and three
gear motors which drive the reels.
-'*" "+ Five spool sections, first 3 spool
sections control lowering, mowing and lift functions of
the cutting units. Spools moved out, provide lowering
and MOW" operation, moved in provides Lift"
operation.
Number 4 spool section controls traction functions, N
(Neutral), 1 (Mow), and 2 (transport). Spool is
controlled by direct linkage from hand shift lever with a
positive detent feel in N, 1, and 2.
Number 5 spool section controls forward and reverse
traction being infinitely variable in both forward and
reverse from zero (spring loaded centering) to the
maximum speeds.
' '((*'
8 -12 PSI - front
8 -15 PSI - rear
'!( 6 in. drum-type mechanical with rack and
pawl lock for parking.
-'*" ")' 10 micron, cartridge type, 905 sq. in
filter area for extra long life.
-'*" " ('+%' 4.5 gal. capacity with internal
baffle. Type fluid: Mobil 424. Red dye is added at
factory.
( $! 7.5 gal capacity.
*" ")' Inline type.
*" *#& Vacuum pulse type .
) *()#$) 7 inches (forward and rearward).
" '$(
Drive Wheels: Needle provided in wheel motors.
Rear Caster Wheel: Timken tapered roller.
")'" $()'*#$))%$ Engine contains 16
amp alternator, circuit is fused by a fusible link.
lnstruments include voltmeter and hour meter.
Accessory terminal is available if attachment of
headlight is desired (15 amp max.).
))'- 12 Volt, Lead Acid, 32 Amp. Hour . Size:
Length - 7.25 in. Width - 4.88 in. Height - 6.00 in.
$'" &)%$(
Width of Cut: 59 inches
Wheel Tread: 49-1/2 inches
Wheel Base: 46-7/8 inches
Overall Length: 90 inches
Overall Width: 69-3/4 inches
Overall Height: 48-1/2 inches
Net Weight (Wet): 930 lb.
Weight w/ Reels: 1173 lb
&(
1st - 3.8 mph Approx.
2nd- 8.1 mph Approx.
Rev. - 1.9 mph Approx.
Reels: 1975 RPM Approx
Clip:
0.18 in. Approx. (11 Blade Cutting Unit)
0.25 in. Approx. (8 Blade Cutting Unit)
((%'(
8 Blade, 4 Bolt Cutting Unit (HD) Model No. 04405
8 Blade, 4 Bolt Cutting Unit Model No. 04408
11 Blade, 4 Bolt Cutting Unit Model No. 04406
8 Blade, SPA Cutting Unit Model No. 04468
11 Blade, SPA Cutting Unit Model No. 04450
8 Blade, 4 Bolt Cutting Unit Model No. 04480
11 Blade, 4 Bolt Cutting Unit Model No. 04481
8 Blade, SPA Cutting Unit Model No. 04482
11 Blade, SPA Cutting Unit Model No. 04483
Groomer Kit Model No. 04456
(Use with cutting unit models 04480, 04481, 04482 &
04483)
Grooming Reel Kit Model No. 04455
(Use with cutting unit models 04404, 04408, 04406,
04468 & 04450)
Thatching Reels Model No. 04493
Variable Traction Speed Kit Model No. 04422
Spiker Model 04494
Tri-Roller Model 04495
Individual Reel Shut Off Kit Part No. 28-2150
Basket Reinforcement Kit Part No. 26-0900
Backlapping Kit Part No. 92-9656
High Altitude Jet Part no. 805537
(Order from your local Briggs & Stratton Dealer)
&)%$( $ ($ (* ) )% $ ,)%*) $%)