Service Manual
GR 800/1000/1010/1600/1610/2000/2600 Page 7 − 3 Cutting Unit
Specifications
Figure 1
REEL CONSTRUCTION (GR1000): 5−inch (12.7 cm)
diameter, 11 carbon steel blades (optional 8 blades)
welded to 5 stamped steel spiders.
HEIGHT−OF−CUT RANGE (GR1000): 5/64 to 1 inch
(2 to 25 mm)
WIDTH−OF−CUT (GR1000): 21 inches (53.3 cm)
CLIP (GR1000): 0.16 inch (0.41 cm)
REEL CONSTRUCTION (GR1600): 5−inch (12.7 cm)
diameter, 8 carbon steel blades welded to 6 stamped
steel spiders.
HEIGHT−OF−CUT RANGE (GR1600): 1/8 to 1−1/4
inch (3 to 32 mm)
WIDTH−OF−CUT (GR1600): 26 inches (66.0 cm)
CLIP (GR1600): 0.23 inch (0.58 cm)
BEDKNIFE AND BEDBAR: Single edged high carbon
steel bedknife, hardened to RC 48-54. A cast iron bed-
bar is fastened to the mower. Tournament bedknife (Part
No. 93−4263) is standard.
Cutting Unit