Service Manual

GR 800/1000/1010/1600/1610/2000/2600
Page 6 − 9
Wheels and Accessories
3. If the operator presence kit is not installed, secure
console bracket to the clutch skid bracket with three
screws (Fig. 8).
4. Position console (29) over both console brackets
(10 and 19). Secure console to the brackets with four
screws (13) (Fig. 2).
5. Run new clutch cable to the bellcrank assembly.
Install new cable to the clutch lever as follows (Fig. 7).
A. Attach clutch cable to the clutch bracket. Tighten
nut to secure cable to the bracket.
B. Secure clutch cable eyelet to the clutch lever
with shoulder bolt and lock nut.
6. Install new cable ties to the right side of the handle.
7. Adjust clutch cable and close bellcrank cover (see
Clutch Control Adjustment in Chapter 3.1 − Kawasaki
Engine).
Wheels and
Accessories