Service Bulletin

Toro Customer Bulletin LR #18-03 Page 11 of 14
2018 Universal Groomer Updates Reelmaster July 25, 2018
Figure 2
1. Syringe with gear oil
2. Fill port
10. Install the drain plug.
11. Use a syringe (Part No. 137-0872) to fill the drive box with 80-90W oil. Fill with 50cc for 5-inch
reels or 90 cc for 7-inch reels. (Figure 2)
12. Install the fill plug and tighten the air-vent plug. (Figure 3)
13. Torque all plugs to 3.62 to 4.75 N-m (32 to 42 in-lb).
Figure 3
1. Air-vent 3. Drain plug
2. Fill plug
Installing the Groomer Drive Cap
Note: Only for universal groomer assemblies without a rear roller brush kit installed.
1. Apply medium-strength cylindrical bonding retaining compound (such as Green Loctite 609
®
)
around the snap ring groove and the inside diameter surface of the cap. (Figure 4)
2. Install the cap as shown in Figure 4.