Operator's Manual

5. Secure g round wires from lights to the engine

bloc k g round.

6. Install a 10 amp . fuse to fuse bloc k at location

sho wn on fuse bloc k decal. Do not ex ceed

fuse rating .

Figure 51

Switch

Relay

Toro Part No. 75-1010 Toro Part No. 70-1480

Honeywell Part No. 1TL1-2 Hella Part No. 87411 B

Drive System

Maintenance

Checking the Torque of the

Wheel Nuts or Bolts

F ailur e to maintain pr oper torque of the

wheel n uts could r esult in per sonal injur y .

T orque the fr ont wheel n uts and r ear

wheel bolts to 85-100 ft.-lb . after 1-4 hour s

of operation and a gain after 10 hour s of

operation. T orque ev er y 200 hour s ther eafter .

Checking the Planetary Gear

Drive Oil

1. With mac hine on lev el surface , position wheel

so the c hec k/drain plug ( Figure 52 ) is at either

2 or 10 o’cloc k position.

Figure 52

1. Check/drain plug

2. R emo v e the plug on the planetar y ( Figure 52 )

and the c hec k plug on the bac k side of the

brak e ( Figure 53 ).

Oil should be at the bottom of the c hec k plug

hole on front and bac k side of the brak e .