Operator's Manual

21
Glow Plug Indicator Light
When the indicator light (Fig. 22) is lit, indicates glow
plugs are on.
Charge Indicator
The charge indicator (Fig. 22) illuminates when system
charging circuit malfunctions.
Enable/Disable Switch
The enable/disable switch (Fig. 22) is used in conjunction
with lower mow/raise control lever (Joystick) to operate
reels. Reels can be raised but not lowered when in mid
position.
1
2
3
5
4
6
7
9
8
Figure 22
1. Lower mow/raise control
lever
2. Fuel gauge
3. Engine coolant
temperature gauge
4. Engine oil pressure
warning light
5. Engine coolant
temperature warning light
6. Glow plug indicator light
7. Charge indicator
8. Throttle control
9. Enable/disable switch
Hour Meter
The hour meter (Fig. 23) shows total hours that machine
has been operated.
1
Figure 23
1. Hour meter
Backlap Knobs
The backlap knobs (Fig. 24) are used in conjunction with
lower mow / raise control lever for backlapping operation.
Refer to Cutting Unit Maintenance, Backlapping.
Reel Speed Controls
Controls RPM of front and rear cutting units (Fig. 24). #1
position is for backlapping. Remaining settings are for
mowing operations. See section in manual for operating
instructions and decal under seat for proper settings.
1
2
1
2
Figure 24
1. Reel control knobs 2. Backlap knobs