Operator's Manual

• Adjusting the lifted height of the outer front
cutting units
Adjusts the tur naround height of the outer
front cutting units to pro vide g reater clearance
on contoured fairw a ys .
• Adjusting the tra v el of the front three cutting
units
Adjusts the do wnw ard tra v el of the front three
cutting units to allo w for highly contoured
fairw a ys .
Step
4
Adding Rear Ballast
Parts needed for this step:
100lb
Calcium chloride (obtain separately)
1
Rear weight kit, part number 104–1478 (obtain
separately)
Procedure
T o comply with CEN standard EN 836:1997, ISO
standard 5395:1990, and the ANSI B71.4-1999
Standard, add 100 lb (45 kg) of calcium c hloride
ballast is to the rear wheels and install the rear
w eight kit (P ar t Number 104-1478).
Important: If a punctur e occur s in a tir e
with calcium chloride, r emo v e unit fr om
turf ar ea as quickl y as possible. T o pr ev ent
possible dama ge to turf, immediatel y soak
af fected ar ea with w ater .
Step
5
Installing CE Decals
Parts needed for this step:
4
CE decals
2
CE certicate
Procedure
If y ou will be using the mac hine in a CE
countr y , install the supplied CE decals o v er the
cor responding ANSI decals on the product. Store
the CE cer tificates in a safe location.
Step
6
Reading the Manuals and
Storing Additional Parts
Parts needed for this step:
1
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Diagnostic ACE display overlay
1
Ignition keys on ring
1
Hood lock key
1
Gauge bar
2 Screw
2
Wing nut
Procedure
1. R ead the man uals .
2. View the Operator video .
3. T he diagnostic A CE displa y o v erla y is for
diagnosing mac hine malfunctions . Store it in a
safe location.
4. T he g aug e bar , screws , and wing n ut are for
use in setting the cutting units (refer to the
cutting unit Operator’ s Manual ). Store them in a
safe location.
16