Operator's Manual
"
#"
*+46* 7*6:.(.3, 46 2&0.3, &)/9782*387 84 8-*
2&(-.3* 7845 *3,.3* &3) 6*24:* 0*< +642
8-* 7;.8(-
.,
Crankcase capacity is 5.3 qt. with filter.
Park machine on a level surface. Release hood
latch and open hood.
.,96*
44) &8(-
Remove dipstick from tube cap, wipe clean and
reinstall dipstick into tube cap. Pull it out again and
check oil level on dipstick: Oil level must always be in
notch area on dipstick.
.,96*
.578.(0 "9'* &5
If oil level is low, remove tube cap and add SAE
15W-40 CD oil until level reaches top of notch on
dipstick. DO NOT OVERFILL.
Install oil tube cap.
Close hood and secure latch.
!%!" .,
Capacity of system is 3.5 gal.
Check cooling system if low water level light
illuminates.
Park machine on a level surface. Release hood
latch and open hood.
Remove degasser tank cap and check coolant
level. 441&38 1*:*1 7-491) '* 95 84 46 &'4:* 8&'7 3
)*,&77*6 8&30 ;-*3 *3,.3* .7 (41)
+ *3,.3* -&7 '**3 6933.3, 56*7796.=*)
-48 (441&38 (&3 *7(&5* .+ )*,&77*6 (&5
.7 6*24:*) &3) (&97* '9637 114;
*3,.3* 84 (441 &8 1*&78 2.398*7 46 938.1
8-* )*,&77*6 (&5 .7 (441 *349,- 84 849(-
;.8-498 '963.3, -&3)
#"
.,96*
*,&77*6 "&30
If coolant is low, remove degasser tank cap and
add a 50/50 mixture of water and Peugeot
recommended anti-freeze (Toro Part No. 93-7213).
" #! $" %
" ! "!
Install degasser tank cap.
Close hood and secure latch.
# " .,
Capacity of fuel tank is 15 gal.
Remove fuel tank cap.
Fill tank to about one inch below top tank, not filler
neck with No. 2 diesel fuel. Then install cap.
.,96*
9*1 "&30 &5