Operator's Manual

4.Outsidethehood,insertthehookendofthe
latchthroughtheholeinthehood.
Note:Makesurethattherubbersealingwasher
remainstotheoutersideofthehood.
5.Insidethehood,insertthemetalwasheronto
thelatchandsecurewiththenut.
Note:Makesurethatthelatchengagesthe
framecatchwhenitislocked.Usetheenclosed
hoodlatchkeytooperatethehoodlatch.
6
UsingtheCutting-Unit
Kickstand
Partsneededforthisprocedure:
1
Cutting-unitkickstand
Procedure
Wheneveryouneedtotipthecuttingunittoexpose
thebedknife/reel,propuptherearofthecuttingunit
withthekickstandtomakesurethatthenutsonthe
backendofthebedbar-adjustingscrewsarenot
restingontheworksurface(Figure18).
g003985
Figure18
1.Cutting-unitkickstand
Securethekickstandtothechainbracketwiththe
snapperpin(Figure19).
g004144
Figure19
1.Chainbracket3.Cutting-unitkickstand
2.Snapperpin
7
ApplyingtheCEDecals
Partsneededforthisprocedure:
1Warningdecal
1
CEdecal
1Productionyeardecal
Procedure
OnmachinesrequiringCEcompliance,applythe
productionyeardecal(PartNo.133-5615)nearthe
serialplate,theCEdecal(PartNo.93-7252)near
thehoodlock,andtheCEwarningdecal(PartNo.
133-2931)overthestandardwarningdecal(PartNo.
133-2930).
15