Operator's Manual

Figure52
1.Oillter
4.Applyalightcoatofcleanoiltothenewlterseal.
5.Installthereplacementoilltertothelteradapter.
Turntheoillterclockwiseuntiltherubbergasket
contactsthelteradapter,thentightenthelteran
additional1/2turn.
Important:Donotover-tightenthelter.
6.Addoiltothecrankcase;refertoCheckingthe
Engine-OilLevel(page25).
AdjustingtheThrottle
1.Positionthethrottleleverforwardsoitisapproximately
3mm(1/8inch)fromthefrontofthecontrolarmslot.
2.Loosenthethrottlecableconnector,onthethrottle
cable,nexttotheinjection-pumplever(Figure53).
Figure53
1.Throttle-cablepivot3.High-idlestop
2.Injection-pump-leverarm4.Throttle-cableconnector
3.Holdtheinjection-pump-leverarmagainstthe
high-idlestop(Figure53).
4.Whilepullingthethrottlecable,tightenthe
throttle-cableconnectortoremoveanyslack.
Note:Whentightened,thecablepivotmustbefreeto
swivelontheinjection-pump-leverarm.
5.Ifthethrottledoesnotstayinpositionduring
operation,increasethetorqueonthelocknutusedto
setthefrictiondeviceonthethrottlelever.
39