Operator's Manual

Figure4
1.Counterweight
5.Allthecuttingunitsareshippedwiththeturf
compensationspringmountedtotherightsideofthe
cuttingunit.Theturfcompensationspringmustbe
mountedtothesamesideofthecuttingunitasthe
reeldrivemotor.Repositiontheturfcompensation
asfollows:
A.Removethe2carriageboltsandnutssecuringthe
rodbrackettothecuttingunittabs(Figure5).
Figure5
1.Turfcompensationspring3.Springtube
2.Rodbracket
B.Removetheangenutsecuringthespringtube
bolttothecarrierframetab(Figure5)Remove
theassembly.
C.Mountthespringtubebolttotheoppositetabon
thecarrierframeandsecurewiththeangenut.
Theboltheadistobepositionedtotheouterside
ofthetabasshowninFigure6.
Figure6
1.Oppositecarrierframetab
2.Rodbracket
D.Mounttherodbrackettothecuttingunittabs
withthecarriageboltsandnuts(Figure6).
Important:Onthe#4(leftfront)and#5
(rightfront)cuttingunits(Figure7),use
therodbracketmountingnutstoinstallthe
hoseguidestothefrontofthecuttingunit
tabs(Figure8).Thehoseguidesshouldlean
towardthecentercuttingunit(Figure8and
Figure9).
Figure7
Figure8
1.Hoseguide(#4cuttingunit
shown)
3.Nuts
2.Rodbracket
14