Service Manual

InstallingtheHydraulicReelMotor(continued)
g230062
Figure329
1.Aluminumsideplate
4.Setscrew
2.Threadedinsert
5.Reliefvent
3.Greasetting
Note:Cuttingunitswithaluminumsideplateshavethreadedinsertsforthe
reelmotormountingbolts(Figure329).Checktheconditionoftheseinserts
wheneverthereelmotorisremoved.Replacetheinsertsifthereisanydamage.
Tighterinsertsto48to54N∙m(35to40ft-lb)duringinstallation.
g214397
Figure330
1.Weightlocation2.Reelmotorlocation
Note:RefertoFigure330forcorrectplacementofcuttingunitreelmotorsand
weights.
1.CoatthesplineshaftofthereelmotorwithNo.2multipurposelithiumbase
grease.
2.Installthecapscrewsforthereeldrivemotorintothecuttingunitsideplate
andleaveapproximately12.7mm(1/2inch)ofthreadsexposedoneach
screw.
3.Rotatethemotorclockwisesothatthemotorangescleartheboltsinthe
cuttingunitsideplates.Alignthereelmotorshaftsplineswiththecuttingreel
insertsplines.Slidethemotorshaftintothereelinsert.
CuttingUnit:ServiceandRepairs
Page9–18
Reelmaster
®
5410/5510/5610Series
15216SLRevD