Operator's Manual

Figure73
1.Brakecables3.Parkingbrakepawl
2.Screws(2)
4.Brakedetent
2.Presstheparkingbrakepedalforwarduntilthe
brakedetentcompletelyengagesonthebrakepawl
(Figure73).
3.Tightenthe2screwslockingtheadjustment.
4.Pressthebrakepedaltoreleasetheparkingbrake.
5.Checktheadjustmentandreadjustasrequired.
BeltMaintenance
Checktheconditionandtensionofthealternatorbeltafter
therstdayofoperationandevery100operatinghours
thereafter.
TensioningtheAlternatorBelt
1.Openthehood.
2.Checkthetensionofthealternatorbeltbydepressing
it(Figure74)midwaybetweenthealternatorandthe
crankshaftpulleyswith22lb(10kg)offorce.
Figure74
1.Brace3.Pivotbolt
2.Alternatorbelt
Thebeltshoulddeect7/16inch(11mm).Ifthe
deectionisincorrect,proceedtostep3.Ifcorrect,
continueoperation.
3.Loosentheboltsecuringthebracetotheengine
(Figure74),theboltsecuringthealternatortothebrace
andthepivotbolt.
4.Insertaprybarbetweenthealternatorandtheengine
andpryoutonthealternator.
5.Whenyouachievethepropertension,tighten
thealternator,braceandpivotboltstosecurethe
adjustment.
49