Operator's Manual

Figure8
1.Liftarm3.Liftarmpivotyoke
2.Carrierframeshaft
9.Usethefollowingprocedureontherearcuttingunits
whentheheightofcutisabove3/4inch.
A.Removethelynchpinandwashersecuringthe
liftarmpivotshafttotheliftarmandslidethe
liftarmpivotshaftoutoftheliftarm(Figure9).
Figure9
1.Liftarmpivotshaftlynchpinandwasher
B.Inserttheliftarmyokeontothecarrierframe
shaft(Figure8).
C.Inserttheliftarmshaftintotheliftarmand
secureitwiththewasherandlynchpin(Figure9).
10.Insertthecapoverthecarrierframeshaftandlift
armyoke.
11.Securethecapandthecarrierframeshafttothe
liftarmyokewiththesnapperpin.Usetheslotifa
steeringcuttingunitisdesiredorusetheholeifthe
cuttingunitistobelockedinposition(Figure7).
12.Securetheliftarmchaintothechainbracketwith
thesnapperpin(Figure10).Usethenumberofchain
linksdescribedinthecuttingunitOperator’sManual.
Figure10
1.Liftarmchain2.Chainbracket
13.Coatthesplineshaftofthereelmotorwithclean
grease.
14.OilthereelmotorO-ringandinstallitontothe
motorange.
15.Installthemotorbyrotatingitclockwisesothat
themotorangesclearthecapscrews(Figure11).
Rotatethemotorcounterclockwiseuntiltheanges
encirclethecapscrewsthentightenthecapscrews.
Important:Makesurethereelmotorhoses
arenottwisted,kinkedorintheriskofbeing
pinched.
Figure11
1.Reeldrivemotor2.Mountingcapscrews
15