Operator's Manual

Figure80
1.Hydrauliclter
3.Removethelter.
4.Lubricatethegasketonthenewlterwithhydraulic
oil.
5.Ensurethattheltermountingareaisclean.
6.Installthelterbyhanduntilthegasketcontactsthe
mountingsurface,thenrotateitanadditional1/2
turn.
7.Repeattheprocedureontheotherlter.
8.Starttheengineandletitrunforabouttwominutes
topurgeairfromthesystem.
9.Stoptheengineandcheckforleaks.
CheckingtheHydraulicLines
andHoses
Daily,checkhydrauliclinesandhosesforleaks,kinked
lines,loosemountingsupports,wear,loosettings,
weatherdeterioration,andchemicaldeterioration.Make
allnecessaryrepairsbeforeoperating.
WARNING
Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.
•Makesureallhydraulicuidhosesandlinesare
ingoodconditionandallhydraulicconnections
andttingsaretightbeforeapplyingpressureto
thehydraulicsystem.
•Keepyourbodyandhandsawayfrompin
holeleaksornozzlesthatejecthighpressure
hydraulicuid.
•Usecardboardorpapertondhydraulicleaks.
•Safelyrelieveallpressureinthehydraulicsystem
beforeperforminganyworkonthehydraulic
system.
•Getimmediatemedicalhelpifuidisinjected
intoskin.
HydraulicSystemTestPorts
Usethehydraulicsystemtestportstotestthepressurein
thehydrauliccircuits.ContactyourlocalTorodistributor
forassistance.
Usethetestportsonthefronthydraulictubes(Figure81)
toassistintroubleshootingthetractioncircuit.
Figure81
1.Tractioncircuittestport
Usethetestportsonthemowmanifoldblock
(
Figure82)toassistintroubleshootingthemowcircuit.
54