Operator's Manual

OPERATING INSTRUCTIONS

Warning System - If a warning light comes on during

operation, stop the machine immediately and correct

the problem before continuing operation. Serious

damage could occur if the machine is operated with a

malfunction.

Mowing -Start engine and move throttle to FAST so

engine is running at maximum speed. Move the

ENABLE / DISABLE switch to ENABLE and use the

LOWER MOW / RAISE lever to control the cutting units

(front cutting units are timed to lower before the rear

cutting units). To move forward and cut grass, press

traction pedal forward.

Transport - Move the ENABLE / DISABLE switch to

joy stick DISABLE and raise the cutting units to the

transport position. Be careful when driving between

objects so you do not accidentally damage the

machine or cutting units. Use extra care when

operating machine on slopes. Drive slowly and avoid

sharp turns on slopes to prevent roll overs. The cutting

units should be lowered when going downhill for

steering control.