Service Bulletin

INSTALLATION INSTRUCTIONS
Replacing Reelmaster 5000 and 6000 Series Sender Plate (105-7934)
1. Mark the tank where the assembly
mark is found on the existing Sender
Plate. (see figure 1)
2. Remove Sender Assembly from the
tank.
3. Remove existing Sender Plate from
sender. Make note of insulator
positions and their order for
reassembly.
4. Reassemble the sender using
replacement Sender Plate (105-7934).
(see figure 2 ) Insure insulators are
positioned in the order they were
disassembled and that the arrow points
toward the float.
5. Insert Sender Assembly into fuel tank
and secure. Insure assembly mark is
aligned with the mark on the tank from
step 1.
File reference:
LR05-09.doc
Assembly Mark
Sender Plate
Figure 1
Figure 2
Top View of Assembled Sender
With Replacement
Sender Plate (105-7934)
Installed
Existing Sender Plate