Service Manual

Rev. E
Reelmaster 5200-D/5400-D Hydraulic SystemPage 4 - 79
Flow Divider
On machines with serial numbers above 200000001,
the lift circuit for the front, outer lift cylinders includes a
flow divider to provide for even lifting of those cutting
units. Lift speed of the front, outer cutting units should be
similar when the flow divider is functioning correctly. The
flow divider assembly mounts to the front of the frame
(Fig. 99).
The flow divider on machines with serial numbers from
200000001 to 210000400 consists of a three (3) port
manifold and a flow divider cartridge. The flow divider on
machines with serial numbers above 210000400 in-
cludes a solenoid cartridge valve and two (2) flow regu-
lator cartridges (Fig. 100).
If necessary, the cartridges can be carefully removed
from the manifold for cleaning.
1. Flow divider
2. O--ring
3. Hydraulic fitting
4. Hydraulic fitting
5. Cap screw (2 used)
6. Flat washer (2 used)
7. Hydraulic fitting
8. Lock nut (2 used)
9. Mounting bracket
Figure 99
6
7
3
5
4
1
8
2
9
2
2
1. Manifold
2. Solenoid cartridge valve
3. Flow regulator cartridge
Figure 100
2
3
1
20 to 25 ft--lb
(27to34N--m)
4
30 to 35 ft--lb
(41to47N--m)
50 to 55 in--lb
(5.6 to 6.2 N--m)
Hydraulic
Systems