Service Manual

REELMASTERR 2300–D/2600–D Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Maintenance Procedure Maintenance Interval & Service
Inspect Air Filter, Dust Cup, and Baffle
Every
50hrs
Every
100hrs
Every
200hrs
Every
400hrs
Lubricate All Grease Fittings
{ Change Engine Oil
A–Level
{ Check Fan and Alternator Belt Tensions
Service
{ Change Engine Oil and Filter
B–Level
{ Check Traction Belt Tension
Service
Service Air Filter
Replace Fuel Filter/Water Separator
{ Replace Hydraulic Filter
C–Level
{ Torque Wheel Lug Nuts
Service
Replace Hydraulic Fluid
Check Battery Level/Connections
Inspect Traction Linkage Movement
* Inspect Spider Coupling for Wear
D–Level
} Torque Head Bolts and Adjust Valves
Service
} Check Engine RPM (idle and full throttle)
{ Initial break in at 10 hours
* Every 400 hours or annually, whichever occurs first
} Initial break in at 50 hours
Replace all Moving Hoses Annual Recommendations:
Replace Safety Switches
Items listed are recommended every 1000 hours
or 2 years, whichever occurs first.
Cooling System – Flush/Replace Fluid
Replace Thermostat
Fuel Tank – Drain/Flush
Hydraulic Tank – Drain/Flush
(See Operator’s and Service Manuals for specifications and procedures.)
Product Records and Manuals
Page 2 – 6
Reelmaster 2300–D/2600–D