Operator's Manual
34
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Interval
Maintenance Procedure
After first 10 hours
• Check Fan and Alternator Belt Tensions
• Change Hydraulic Filter
• Torque Wheel Lug Nuts
After first 50 hours
• Change Engine Oil and Filter
• Check Engine RPM (idle and full throttle)
Every 50 hours
• Inspect Air Filter, Dust Cup, and Burp Valve
• Lubricate All Grease Fittings
• Check Battery Cable Connections
• Check Fan and Alternator Belt Tensions
• Check Battery Fluid Level
Every 100 hours • Check Traction Belt
Every 150 hours • Change Engine Oil and Filter
Every 200 hours
• Change Air Filter
• Change Hydraulic Filter
• Torque Wheel Lug Nuts
Every 400 hours
• Change Hydraulic Fluid
• Change Fuel/Water Separator Filter
• Change Fuel Pre Filter
• Inspect Traction Cable Movement
• Inspect Spider Coupling for Wear
• Check Engine RPM (idle and full throttle)
Every 800 hours • Adjust valves
Every 1000 hours
• Replace Moving Hoses
• Replace Safety Switches
• Coolant System – Flush/Replace Fluid
• Fuel Tank – Drain/Flush
• Hydraulic Tank – Drain/Flush