Operator's Manual

3.Liftthemagneticallymountedconsolecover
(Figure93)toexposethemowermanifold.
g353458
Figure93
4.MovethebacklaplevertotheR(backlap)
position(Figure94).
g353378
Figure94
1.Backlapcontrol2.Reelspeedcontrol
LappingtheReelsandBedknife
DANGER
Changingtheenginespeedwhilebacklapping
maycausethecuttingunitstostall.
•Neverchangetheenginespeedwhile
backlapping
•Backlaponlyatidleenginespeed.
Note:Theseatswitchisbypassedwhenthebacklap
controlisinthebacklapposition.Youdonotneedto
beintheseat,buttheparkingbrakemustbeengaged
fortheenginetorun.
1.Starttheengineandallowittorunatlowidle
speed.
2.PressthecuttingunitdriveswitchtotheENGAGE
position.
3.Applylappingcompoundtothereelwitha
long-handlebrush.
DANGER
Contactingthecuttingunitswhenthey
aremovingcouldcausepersonalinjury.
Toavoidpersonalinjury,becertainthat
youareclearofthecuttingunitsbefore
proceeding.
Important:Neveruseashort-handled
brush.
4.Ifyouneedtomakeanadjustmenttothecutting
unitswhilebacklapping,performthefollowing
steps:
A.Pressthecuttingunitdriveswitchtothe
DISENGAGEposition.
B.Shutofftheengineandremovethekey.
C.Adjusttothecuttingunits.
D.Repeatsteps1through3.
5.Repeatsteps3fortheothercuttingunitsthat
youwanttobacklap.
FinishingBacklapping
1.Pressthecuttingunitcontrolswitchtothe
DISENGAGEposition.
2.Shutofftheengine.
3.MovethebacklaplevertotheF(mow)position
(Figure95).
Important:Ifyoudonotchangebacklap
levertotheF(mow)positionafter
backlapping,thecuttingunitswillnot
functionproperly.
g353378
Figure95
1.Backlaplever2.Reelspeedcontrolknob
4.Assembletheconsolecovertothecontrol
console.
63