Operator's Manual

g353278
Figure27
1.Bumperstrap
3.0.51to2.54mm(0.02to
0.10inch)gap
2.Wearbar(rearcuttingunit)
5.Starttheengine,lowerthecuttingunits,shut
offtheengine,removethekey,andwaitforall
movingpartstostop.
AdjustingLiftArmClearance
1.Ateachsideofthemachine,loosenthejamnuts
andbackofftheliftarm-stopbolts(Figure28).
g353221
Figure28
1.Jamnut
2.Liftarm-stopbolt
2.Loosenthejamnutonthelift-cylinderrod
(Figure29).
g008878
Figure29
1.Frontliftcylinder
2.Jamnut
3.Removethepinfromtherodendandrotatethe
clevis.
4.Installthepinandchecktheclearance.
5.Repeatsteps1through4ifnecessary.
6.Starttheengine,raisethecuttingunits,shut
offtheengine,removethekeyandwaitforall
movingpartstostop.
7.Measurethedistancebetweentheleftandright
liftarmsandtheoorplatebrackets.
Note:Thecorrectclearanceis0.51to2.54mm
(0.02to0.10inch).
8.Repeatsteps3through7asneeded.
9.Tightentheclevisjamnut.
10.Repeatsteps2through9attheothersideofthe
machine,thenperformtheAdjustingtheLiftArm
StopBolts(page23)procedure.
AdjustingtheLiftArmStopBolts
Important:Alackofclearanceatthestopbolts
coulddamagetheliftarms.
Note:Iftherearliftarmclunksduringtransport,
reducetheclearance.
1.Starttheengine,raisethecuttingunits,shut
offtheengine,removethekeyandwaitforall
movingpartstostop.
2.Adjustthestopboltuntilyoumeasure0.13to
1.02mm(0.005to0.040inches)betweenthe
stopboltandthelift-armplate.
23