Installation Instructions

InstallingthePressureHose
1.Assemblethe90°ttingofthedifferential
pressurehoseontothestraightttinginport-MB
ttingofthetractionpump(Figure35).
g343558
Figure35
1.Straighttting(port-MB
tting—tractionpump)
2.Differentialpressurehose
(90°tting)
2.Routethedifferentialpressurehosetothe
tractionmanifold.
3.Assemblethestraightttingofthedifferential
pressurehoseontostraightttinginport-B1of
thefronttractionmanifold(Figure36andFigure
37).
g342834
Figure36
g343557
Figure37
1.Straighttting
(port-B1—fronttraction
manifold)
2.Differentialpressurehose
(straighttting)
4.Torquetheswivelnutsofthedifferentialpressure
hosettingsto32N∙m(24ft-lb).
InstallingtheBrakePressure
Transducer
MachineswiththeOptionalRoadLightKit
1.Routethe3-pinconnectorlabeledBRAKE
PRESSURESENSORandwiringtoward
front-tractionmanifold(Figure38).
g344918
Figure38
1.Front-tractionmanifold3.Frontofthemachine
2.3-pinconnector(labeled
BRAKEPRESSURESENSOR)
2.Removethehex-socketplugfromport-PSofthe
fronttractionmanifold(Figure39).
13