8V CORDLESS FLASHLIGHT 241-9028 Owner’s Manual NOTE: This 3 piece tool combo includes two 18V 1.5 Ah Li-ion batteries and one charger that are packed within the kit. PRODUCT SPECIFICATIONS Bulb: Argon Switch: ON/OFF push button Pivoting head: 20 Positions - 90° through 180° Replacement battery: 236-9025 Replacement charger assembly: 236-9026 Replacement bulb: 18V, 0.
TABLE OF CONTENTS Product specifications ………….……………………………………………………. Table of contents ……………………………………………………………………... General safety warnings …………………………………………………………….. Eye, ear & lung protection …………………………………………………………… Electrical safety ………………………………………………………………………. Power tool safety ……………………………………………………………………... General safety rules ………………………………………………………………….. Work area ………………………………………………………………….………….. Electrical safety ………………………………………………………………………. Personal safety ………………………………………………………………………..
GENERAL SAFETY WARNINGS ! WARNING: Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible situations. It must be understood that common sense and caution are factors which cannot be built into the product.
GENERAL SAFETY WARNINGS WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT. ! WARNING: Dust that is created by power sanding, sawing, grinding, drilling, and other construction activities may contain chemicals that are known to cause cancer, birth defects, or other genetic abnormalities.
POWER TOOL SAFETY ! WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of a ground fault circuit interrupter (GFCI) reduces the risk of electric shock. Save all warnings and instructions for future reference.
POWER TOOL SAFETY Power tool use and care Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
BATTERY & CHARGER SAFETY ! WARNING: Only use the charger supplied with this kit to charge the 18V Li-ion batteries for this tool. Charging any other batteries may damage the charger and possibly cause serious injury. The charger should be placed away from sinks and hot surfaces. Do not use the charger to charge any batteries other than the cordless drill/driver batteries. Other batteries may explode. Do not store or carry the battery in a manner in which metal objects could contact the exposed metal end.
SYMBOLS ! WARNING: Some of the following symbols may appear on the flashlight. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool.
KNOW YOUR FLASHLIGHT Pivoting head Lens retainer ON/OFF switch Flashlight base NOTE: This 3 piece tool combo includes two 18V 1.5 Ah Li-ion batteries and one charger that are packed within the kit.
ASSEMBLY AND OPERATING CHARGING THE BATTERY PACK 1. 2. 3. INSTALLING THE BATTERY IN THE FLASHLIGHT Place the battery (1) in a dry location near a 120 V 60 Hz electrical outlet (Fig. 1) 1. Plug the battery charger transformer (2) into the 120 V 60 Hz wall receptacle. NOTE: The GREEN LED (3) on the charging cap (4) will turn ON indicating the power supply is “live”. Insert the stem on the battery (1) into the matching cavity in the bottom of the flashlight handle (2) (Fig. 2). 2.
ASSEMBLY AND OPERATING FLASHLIGHT SWITCH – cont’d Fig. 3 REPLACING THE BULB ! Fig. 4 WARNING: The lens and bulb become very hot when the flashlight is turned ON. Wait for lens to cool before removing lens cover or bulb. Remove the battery before replacing the bulb. FREE STANDING USE AND PIVOTING HEAD The flashlight can be hand held by the handle. It can also be used as a free-standing light by standing it upright on the battery.
MAINTENANCE BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING GENERAL ! WARNING: When servicing, use only identical replacement parts. The use of any other part may create a hazard or cause product damage. To preserve our natural resources, please recycle or dispose of batteries properly. The batteries accompanying this tool may contain chemicals and metals that are harmful to the environment.
EXPLODED VIEW 13
PARTS LIST ! WARNING: When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the flashlight. Any attempt to repair or replace electrical parts on this flashlight may create a safety hazard unless repairs are performed by a qualified technician. For more information, call the Toll-free Helpline, at 1866-349-8665 – Friday from 9am to 5pm Eastern Standard Time. Always order by PART NUMBER, not by key number.
TOOL SHOP® 18 VOLT LI-ION FLASHLIGHT WARRANTY 1-YEAR LIMITED WARRANTY: ® This TOOL SHOP brand power tool carries a 1-Year Limited Warranty to the original purchaser. If the tool fails within one (1) year from the date of purchase, simply bring this tool with your original sales receipt back to your nearest MENARDS® retail store.
