8 VOLT CORDLESS DRILL/DRIVER 241-9027 Owner’s Manual NOTE: This 3 piece tool combo includes two 18V 1.5 Ah Li-ion batteries and one charger that are packed within the kit.
TABLE OF CONTENTS Product specifications ………….……………………………………………………. Table of contents ……………………………………………………………………... General safety warnings …………………………………………………………….. Eye, ear & lung protection …………………………………………………………… Electrical safety ………………………………………………………………………. Power tool safety ……………………………………………………………………... General safety rules ………………………………………………………………….. Work area ………………………………………………………………….………….. Electrical safety ………………………………………………………………………. Personal safety ………………………………………………………………………..
GENERAL SAFETY WARNINGS ! WARNING: Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible situations. It must be understood that common sense and caution are factors which cannot be built into the product.
GENERAL SAFETY WARNINGS WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT. ! WARNING: Dust that is created by power sanding, sawing, grinding, drilling, and other construction activities may contain chemicals that are known to cause cancer, birth defects, or other genetic abnormalities.
POWER TOOL SAFETY ! WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of a ground fault circuit interrupter (GFCI) reduces the risk of electric shock. Save all warnings and instructions for future reference.
POWER TOOL SAFETY PERSONAL SAFETY – cont’d Battery tool use and care Power tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
SPECIFIC SAFETY RULES ! WARNING: Know your cordless drill/driver. Do not plug in the charger or install the battery in the tool until you have read and understand this Instruction Manual. Learn the tool’s applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury. Always wear eye protection. Any power tool can throw foreign objects into your eyes and cause permanent eye damage.
BATTERY & CHARGER SAFETY ! WARNING: Only use the charger supplied with this kit to charge the 18V Li-ion battery. Charging any other batteries may damage the charger and possibly cause serious injury. Do not store or carry the battery in a manner in which metal objects could contact the exposed metal end. Do not place the battery in aprons, pockets, drawers, etc. with loose nails, screws, keys etc. The battery could short circuit causing a fire, personal injury or damage to the battery.
SYMBOLS ! WARNING: Some of the following symbols may appear on the cordless drill. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool. V A Hz W kW L kg H N/cm2 Pa OPM Min S or a.c.
KNOW YOUR CORDLESS DRILL/DRIVER Horizontal level Double sleeve keyless chuck Torque clutch Trigger switch Forward / reverse switch Double ended screwdriver bit Battery #236-9025 NOTE: This 3 piece tool combo includes two 18V 1.5 Ah Li-ion batteries and one charger that are packed within the kit.
ASSEMBLY AND OPERATING CHARGING THE BATTERY PACK 1. 2. 3. INSTALLING THE BATTERY PACK IN THE DRILL/DRIVER Place the battery (1) in a dry location near a 120 V 60 Hz electrical outlet (Fig. 1) 1. Plug the battery charger transformer (2) into the 120 V 60 Hz wall receptacle. NOTE: The GREEN LED (3) on the charging cap (4) will turn ON indicating the power supply is “live”.
ASSEMBLY AND OPERATING ADJUSTING THE TORQUE FORWARD/REVERSE SWITCH Your drill/driver is equipped with an adjustable torque clutch for driving different types of screws into different types of materials. It also has a setting for "drilling". The forward/reverse switch (1) is conveniently mounted above the trigger switch (2) (Fig. 6). To make the drill rotate clockwise (for drilling) push the forward/reverse switch to the left.
ASSEMBLY AND OPERATING VARIABLE-SPEED TRIGGER SWITCH – cont’d NOTE: Hand tighten the chuck jaws. Do NOT use pliers. You will damage the chuck. Fig. 7 INSTALLING DRILL BITS Fig. 8 ! WARNING: Never hold the chuck body with one hand and use the drill/driver power to rotate the drill/driver body to loosen or tighten bits. Serious injury may result. ! WARNING: Do not insert the drill bit into the chuck and tighten as shown in Fig. 9.
ASSEMBLY AND OPERATING HORIZONTAL BUBBLE LEVEL DRILLING This drill/driver is equipped with a bubble level to assist you in keeping the drill/driver "level" while drilling horizontal holes. When drilling into smooth, hard surfaces such as metal, use a center punch to mark the desired hole location. This will prevent the drill bit from slipping off center as the hole is started. The horizontal level (1) is located in the top of the drill/driver housing (Fig. 10).
ASSEMBLY AND OPERATING DRILLING – cont’d NOTE: Do not continue to drive the screw once the clutch has released. This causes unnecessary wear of the clutch. When drilling metals, use light oil on the drill bit to keep it from overheating. The oil will prolong the life of the drill bit and improve the cutting action. If the bit jams in the workpiece, or if the drill/driver stalls, release the trigger switch immediately. Remove the bit from the workpiece and determine the reason for jamming.
MAINTENANCE GENERAL BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING ! WARNING: When servicing, use only identical replacement parts. The use of any other part may create a hazard or cause product damage. To preserve our natural resources, please recycle or dispose of batteries properly. The batteries accompanying this tool may contain chemicals and metals that are harmful to the environment.
AVAILABLE PARTS 1 2 7 6 4 3 ! WARNING: When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the cordless drill/driver. Any attempt to repair or replace electrical parts on this multi-function power tool may create a safety hazard unless repairs are performed by a qualified technician. For more information, call the Toll-free Helpline, at 1-866-349-8665. Always order by KEY NUMBER, not by part number.
TOOL SHOP® 18 VOLT CORDLESS DRILL WARRANTY 1-YEAR LIMITED WARRANTY: ® This TOOL SHOP brand power tool carries a 1-Year Limited Warranty to the original purchaser. If the tool fails within one (1) year from the date of purchase, simply bring this tool with your original sales receipt back to your nearest MENARDS® retail store.