User guide

©Toner Cable Equipment, Inc. Specifications Subject To Change Without Notice.
Telephone: Nationwide: Fax: E-mail: Internet:
03/10
Avcom Portable Spectrum Analyzers
215-675-2053 800-523-5947 215-675-7543 [e-mail] http://www.tonercable.com
969 Horsham Road
Horsham, Pennsylvania 19044 USA
Portable Spectrum Analyzers
• Small Compact Design
• Battery Powered for Remote Field Use
• 13/18 Volt LNB Power & 22 KHz
• 4 R.B.W. Selections including 10 KHz
• Ethernet & Serial Communications
• Ability to Monitor the 10MHz Reference Signal
• User Friendly and Intuitive GUI
Technical Specifications PSA-2150C PSA-2500C
Frequency Coverage: 950MHz – 2,150 MHz 5 MHz - 2,500 MHz
Span Width: 0 - 1300 MHz
Resolution Bandwidth: 10KHz, 100KHz, 300KHz, 1MHz
RF Sensitivity: Greater than - 85 dBm Typical
Reference Levels: Selectable - 10 dBm, - 30 dBm, -50 dBm
Scale: 5 dB & 2dB per Division
Dynamic Range: 40 dB on Application Window
Amplitude Accuracy: +/- 1 dB typical
Frequency Accuracy: +/- 1KHz typical
Input Connector: “BNC” is standard “F”, “N”, “SMA” & “TNC” available
Inputs: Single is Standard, Dual Available
Size: 9.25” W x 6” H x 7” D
Weight: 6 lbs
Power Requirements: +15 VDC
Display: Full VGA Color LCD
PSA-2150C
Small Compact Design
The PSA-2150C was designed for the Field Engineer to have a very use-
ful, compact tool that eliminates the need for carrying around a big bulky
bench-top unit. The PSA-2150C has the option to have dual switching
inputs so that you can easily setup cross pole or monitor 2 different feeds
simultaneously.
Improved Performance & Specifications
The new PSA-2150C was designed for excellent frequency and amplitude
accuracy with a wide variety of resolution bandwidth selections ranging
from 10KHz to 1MHz. This is required to allow for viewing and monitoring
of small TT&C and data carriers found in many satellite communications
markets today. The wideband input will also allow for monitoring of a
10MHz reference signal as well.
Versatile Graphical User Interface
The new Avcom Graphical User interface (GUI) is based on the National
Instruments Labview Platform and has been customized for several of our
customer’s applications. The Avcom GUI will run on the WINDOWS 2000,
XP and Vista platforms. Avcom also offers a multi user version of the
software so that multiple users can monitor at the same time.
PSA-2500C
950 - 2150 MHz
5 - 2500 MHz