Owner's manual

Telephone: Nationwide: Fax: E-mail: Internet:

09/04

Greenlee D’VersiBIT System

215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com

969 Horsham Road

Horsham, Pennsylvania 19044 USA

D’VersiBIT

System

Long (up to 72”) Shaft, Flexible Drill Bit System

for Wire and Cable Installers

The D’VersiBIT System

allows installers to easily

install wiring and cable

without expensive and

time consuming wall dam-

age and repairs. The sys-

tem features flexible

spring steel shaft with

high quality drill bits up to

72” long (144’ long with

extension shaft).

The system has five different type drill

bits with two length options - 36”

(914mm) and 72” (1828mm). Bit types

are M (masonry), HS (high speed steel),

A (auger), B (screw point), and C (com-

bination). In addition to the bits, there is

a placement tool for aligning the bit

inside the wall and to guide it. There are

also wire and cable pulling grips that

attach to a hole in the bit to pull the wire.

GREENLEE

PLACEMENT

TOOL

PAGE 1
G GREENLEE® 969 Horsham Road Horsham, Pennsylvania 19044 USA D’VersiBIT® System Long (up to 72”) Shaft, Flexible Drill Bit System for Wire and Cable Installers The D’VersiBIT System allows installers to easily install wiring and cable without expensive and time consuming wall damage and repairs. The system features flexible spring steel shaft with high quality drill bits up to 72” long (144’ long with extension shaft).
PAGE 2
Ordering Information Bit Diameter 3/8” (9.5 mm) Shaft Length Shaft Diameter Type M Type HS Type A Type B Type C Masonry High Speed Auger Screw Point Combination Steel 36” (914 mm) 3/16” (4.8 mm) 3836D 06-03-36A 06-03-36B 06-03-36C 54” (1371 mm) 3/16” (4.8 mm) 06-03-54M 72” (1828 mm) 3/16” (4.8 mm) 3872D 06-03-72A 06-03-72B 06-03-72C 1/2” (12.7 mm) 36” (914 mm) 3/16” (4.8 mm) 72” (1828 mm) 3/16” (4.8 mm) 1236D 1272D 9/16” (14.3 mm) 36” (914 mm) 3/16” (4.8 mm) 72” (1828 mm) 3/16” (4.