User guide

Fiber Optic Tools
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: [phone] Fax: [phone]
l
[e-mail]
86 1/2SF Electronic/Kevlar Shears
86 1/2SF is a high leverage tool for cutting, trimming and slicing through fiber and other tough
industrial and electronics materials. Use 86 1/2SF to trim DuPont Kevlar
®
Aramid fibers. Hot-
forged, high carbon steel for long life, quick action spring response, and two sharp points. 86
1/2SF has one blade serrated and red cushioned grips.
CC125 Fiber Optic Cleaver
Produces extremely precise cleave lengths from 6.5 mm to 20 mm. Produces endface angles
of less than 2 degrees 100% of the time. Ideal for achieving the precise cleaves required by
the new generation of “no polish” fiber connectors - in either simplex or duplex cables.
Tremendous repeatability - once the cleave length is set and locked, every cleave will be the
same precise length. Steel handles with plastic grips. Anodized aluminum cleaving blocks/fix-
turing. Carbide cleaving blade, polyurethane rubber cleaving and gripping pads. Compatible
fibers: glass fibers with 125-micron nominal cladding diameters; accommodates fibers in coat-
ed as well as cable form.
86 1/2SF
CC125
FO 103-S Fiber Optic Stripper Line
– For stripping 250 micron buffer coating from 125 micron optical fiber
– Precision diameter hole & V-opening blade allow for accurate buffer coating removal to pre-
vent scratching or nicking of optical fiber
– Available in a variety of stripping fiber diameters
FO 103-S
FO 103-D-J, FO 103-D-250 Dual-Hole Fiber Optic Strippers
– New dual hole models offer the same quality of our standard FO 103-S fiber tool coupled with
a second hole
– FO 103-D-J: Second hole for stripping 2-3 mm fiber jackets and standard 125 micron fiber
– FO 103-D-250: Second hole for stripping 900 micron tight buffer down to 250 micron buffer
coating
FO 103-D-J
NN203
– 22 different patented NO-NIK tools in
sizes ranging from 102 to 1,372
microns
– Accurate to -0 mm, +0.127 mm
NO-NIK Fiber Optic Strippers
Model Handle Color Minimum Stripping Blade Diameter Part Number
(Microns) (Inches)
NN102 Navy 102 μm .004 in 46220
NN127 Silver 127 μm .005 in 46225
NN152 Gold 152 μm .006 in 46231
NN175 Mustard 175 μm .007 in 46235
NN203 Red 203 μm .008 in 46241
NN254 Lt. Blue 254 μm .010 in 46249
NN305 White 305 μm .012 in 46255