User Manual

Step 2 Tap”Add Device”or “+”
Step 3 Choose”Electric Outlet”
Notice: There are no any other LED colors except solid blue, solid
green and blinking green, if it became blue with blinking green, that
caused by you touch the on/off button by mistake when you enter the
pairing mode, please just ignore the blue light, only remember that
blinking green light is enter the pairing mode.
1. 1st time to connecting Wi-Fi & phone, make sure the outdoor smart
plug is connected to the same Wi-Fi (2.4G ONLY) as your phone
connected.Dual-band Wi-Fi router- 2.4G & 5G, select 2.4G. After initially
setting, you can access to other Wi-Fi or 4G/3G/2G cellular to control it
2. Phone system: IOS 8.0 or above & Android V4.4 or above.
3. Far away from wifi router or poor wifi will cause wifi connection drop.
Search "Smart Life" on App store, Google Play, or Scan the QR code on
the User Manual and install it.
There are two network connection methods (Normal mode and AP mode).
Normal mode is default. Users could tap the upper right corner to switch
the connection method to AP mode.
Not able to connect the smart product:
1. Please kindly check if the product connects the power, turns
on and enter the configuration status (When the product turns
on, long press the on/off switch for 5 seconds, it will enter
configuration status.)
2. Please check if your mobile phone can connect the Wi-Fi
and have strong Wi-Fi signal.
3. Please make sure the Wi-Fi frequency is 2.4GHz. If Wi-Fi
network frequency is 5GHz, it’s not able to connect the
smart product.
4. Please kindly check if the Wi-Fi password is correct
when you add the smart products to your device. (Note that
case sensitive, punctuation and spaces.)
Please kindly check the above and make sure there is noproblem and
reconnect. If the connection still fails, please check the settings of your Wi-Fi:
1. Please enter the router's setting page: First, turn off ‘SmartSet Up’
and ‘Parental Controls’ these two functions.
2. Wi-Fi setting of your router: The encryption method should be set to
WPA2-PSK type, the authentication type is AES. Or both the encryption
method and the authentication type are automatic. Wireless mode cannot
be ‘11n only’.
3. Wi-fi name and password are recommended to be set to English letters +
Numbers, no spaces and special characters. Please kindly check the above
and make sure there is no problem and reconnect. If the connection still
fails, please heck the settings of your Wi-Fi；
4. Please check if the number of access device has reached the upper limit
of the router. Try to turn off some Wi-Fi devices, restart the router and
reconnect the network.
5. If the router enables wireless MAC address filtering, the device MAC
should be added to the allowed device list to ensure that the router does
not prohibit the device from networking.
Enter mobile number or E-mail address to register an account with
verification code.
Step 1 Set Rapid Flashing Indicator Light (Pairing Mode)
Step 1 Set Slow Flashing Indicator Light (Pairing Mode)
Connect the device
Download the Smart Life APP
Register a Smart life account
2. Smart Life App Connect
Pre-check
On/Off Button
1 In 3 Out
Blinking green
Long press the button
to restore to factory
settings
3 AC outlets individually
controlled or controlled
as a one unit
1.Enter the pairing mode; after
enter the pairing mode the light
will turn into solid green light
2.Solid blue: All on or all off button
for control 3 ac outlets; And individual
control three ac outlets need on
app to operate it;
Outdoor Smart Plug
Model Number: SOP03-15A
Waterproof Level: IP44
Parameters: AC 100-240V 50/60Hz
Max Power: 1875W(resistance loading)
Max Current: 15A
Rated Voltage: 125V
Working Temperature: -20~60°C(-4~140°F)
Remote Control: Smart Life APP (Compatible with Android 4.1/IOS 8.0)
Package content
1 x Outdoor Smart Plug
1 x User Manual
1 x Thanksgiving card
4. Specification
3. FAQ
Step 2 Tap”Add Device”or “+”Step 3 Choose”Electric Outlet”
Step 4 Add Device-AP Mode Step 5 Enter Wifi
Step 6 Connecting Step 7 Edit Device’s Name
Step 4 Add Device-Normal Mode
Step 5 Enter Wifi Password
Step 6 Connecting
Step 7 Edit Device’s Name
（Ⅰ）Normal mode
（Ⅱ）AP mode
Normal Mode, automatic
connect to your home wifi, then
enter Wi-Fi password
.
After the light turn into rapidly blinking
green lights, continue to long press the
on/off button for 5s or more until the
device’s indicator turn into slowly
blinking green lights(1 times 3 seconds)
For AP Mode, connect to the Wi-Fi
hotspot named ”SmartLife”as shown
in the pics. Note: Some devices might
have different hotspot names.
※
※
Product is automatically disconnected/ reconnected during using, no
response during operation, and response lag: 1. Please make sure the
product is under the Wi-Fi coverage with strong signal.
2. Make sure the power supply is stable and the Wi-Fi can be connected
to the external network.
※
Can the device be controlled under Mobile 2G/3G/4G network? When
adding the smart device at the first time, the smart device and the mobile
phone must be in the same 2.4GHz wi-fi environment. After being added
successfully, the mobile phone is able remote control the smart device
under 2G/ 3G/ 4G network (kindly note that the smart device should be
under wifi coverage with strong wifi signal).
※
You’re all set!
Any question?
[e-mail]
www.amazon.com/tonbux
Outdoor Smart Plug
Model: SOP03-15A
User Manual
Long press the on/off button for
5s or more until the device’s
indicator turn into rapidly blinking
green lights (2 times per second)
1. Pls plug the smart
plug into the wall,
and the color is blue
2. Pls long press the on/off
button for 5s or more, the
indicator light will rapidly
1. Pls plug the
smart plug into
the wall, and the
color is blue
2. Pls long press the
on/off button for 5s
or more, the indicator
light will rapidly
flashing.
3. Hold the
on/off button for
5s until the
indicator light
slowly flashing