Tommy Docks 8608 Progress Way, Weston, WI 54476 Phone : 715-842-3804 Toll Free : 866-675-1880 Fax : 715-842-3420 Simple Shore SS-PWC-10000 Assembly Instructions Includes: 7 5 1 8 9 6 10 2 5 11 4 3 12 Item 1 2 3 4 5 6 7 8 9 10 11 12 Description PVC Wheel Axle Stainless Steel Retaining Ring 4ft Support Rest Support Brace Rachet Mount Winch Trunk Mount Front Forward Trunk Assembly Trunk Ramp Adapter Rear Trunk Assembly Axle Mount Enty Plate Qty.
1 Align the Rear Trunk Assembly to the Trunk Ramp Adapter (1a) and fasten using two (2) 4-3/4” Partially Threaded Bolts, four (4) Flat Washers, and two (2) Nyloc Locknuts (1b). 1b Trunk Ramp Adapter 1b 1a Rear Trunk Assembly 2 Align the Forward Trunk Assembly to the other end of the Trunk Ramp Adapter (2a) and fasten using two (2) 4-3/4” partially threaded bolts, four (4) Flat Washers, and two (2) Nyloc Locknuts (2b). 2b 2b 2a Forward Trunk Assembly Trunk Ramp Adapter www.tommydocks.
Insert one (1) Axle into each Wheel (14 total) (3a). Secure using one (1) Stainless Steel Retaining Ring for each Wheel using the Snap-Ring Pliers (3b). Insert all 14 Wheels through the pre-drilled holes located in the Trunk Assemblies (3c) and fasten them on the bottom side using one (1) Stainless Steel Retaining Ring per Wheel (3d). Note: the two shorter Axles must be at the far end of the Rear Trunk Assembly.
5 Fit the Trunk Mount Front over the Forward Trunk Assembly (5a) and fasten them together using two (2) 5” Partially Threaded Bolts, four (4) Flat Washers, and two (2) Nyloc Locknuts (5b). 6 Run the Ratchet Mount through the Trunk Mount Front to the designated height (6a) and fasten them together using two (2) 5-1/2” Partially Threaded Bolts, four (4) Flat Washers, and two (2) Nyloc Locknuts (6b).
8 Mount the Winch using three (3) 3” Partially Threaded Bolts, (6) Flat Washers, (3) Nyloc Locknuts. Winch 9 Align the Support Braces to the pre-drilled holes on the Ratchet Mount and secure using two (2) 2-1/2” Partially Threaded Bolts and two (2) Steel Nuts. Align the Support Braces to the bottom pre-drilled holes on the 4ft Support Rest and secure using two (2) 3/4” Threaded Bolts and two (2) Steel Nuts. Support Brace 9a 4ft Support Rest 9b www.tommydocks.
muelles tommy 8608 Progreso Camino, Weston, WI 54476 Tommy Docks 8608 Progress Way,Teléfono: Weston, WI 54476 715-842-3804 Téléphone 715-842-3804 gratuito: 866-675-1880 Llamada gratuita:Número 866-675-1880 Fax: 715-842-3420 Fax: 715-842-3420 Costa sencilla SS-PWC-10000 Instrucciones de montaje Incluye: 7 5 1 8 9 6 10 2 5 11 4 3 12 Artículo Descripción Cant.
1 Alineeelel conjunto maletero trasero el adaptador la rampa del maletero (1a) ycon sujételo dos (2) pernos Alinee conjunto de del la cajuela trasera con con el adaptador de lade rampa de la cajuela (1a) y fíjelo dos (2)con pernos parcialmente cuatro (4) (4) arandelas planas y dos NylocNyloc (1b). (1b).
un (1) un eje(1) en eje cada (14 en(14 total) usando un de retención de acero inoxidable para cada enrueda cada rueda en(3a). total)Asegúrelo (3a). Asegúrelos con(1)unanillo (1) anillo de retención de acero inoxidable pararueda cada 3 InserteInserte usando los alicates anillos elásticos Inserte las 14 ruedas través de losaorificios pretaladrados en lossituados rueda utilizando lospara alicates para anillos(3b). de retención (3b).
el frente el desoporte montajedelantero del baúl sobre el baúl delantero 5 AjusteColoque del maletero sobre el 6 conjunto delantero del (2) maletero y fíjelosroscados utilizando (5a) y fíjelos usando dos pernos (5a) parcialmente dos (2) pernos parcialmente roscados de 5", cuatro (4) de 5”, cuatro (4) arandelas planas y dos (2) contratuercas arandelas planas y dos (2) contratuercas Nyloc (5b).
8 Monte Monte el cabrestante con tres (3) pernos parcialmente roscados de 3", (6) roscados arandelas de planas y (3)arandelas contratuercas Nyloc. el cabrestante utilizando tres (3) pernos parcialmente 3", (6) planas y (3) contratuercas Nyloc.
Tommy Docks Tommy Docks 8608 Progress Way, Weston, WI 54476 8608 Progress Way, Weston, WI 54476 Téléphone : 715-842-3804 Téléphone : 715-842-3804 Sans frais : 866-675-1880 Sans frais : 866-675-1880 : 715-842-3420 FaxTélécopieur : 715-842-3420 Rive Simple SS-PWC-10000 Instructions de montage Comprend : 7 5 1 8 9 6 dix 2 5 11 4 3 12 Article Description 1 Roue en PVC Qté.
1 Alignerl'ensemble le coffrede arrière l'adaptateur de rampe de de coffre (1a) fixer avec de deux (2)(2)boulons Alignez coffre avec arrière sur l'adaptateur de rampe coffre (1a)etetlefixez à l'aide deux boulons partiellement partiellement filetés de quatre 4-3/4 po, quatre (4)plates rondelles plates(2) et de deux (2) écrous de blocage 4-3/4", (4)derondelles et deux contre-écrous Nyloc (1b). nyloc (1b).
Insérer (1) axe dans chaque roue au total) Fixez-les avec(1) unanneau (1) anneau de retenue en acier inoxydable pour un (1)un essieu dans chaque roue (14(14 au total) (3a).(3a). Fixez à l'aide d'un de retenue en acier inoxydable pour chaque 3 Insérez chaque rouede à l'aide de àlacirclips pince à(3b). anneaux de les retenue (3b).
le supportlede coffre du avant sur avant le coffre 5 Installez Positionner support coffre suravant l'ensemble du 6 coffre avant (5a) et le fixer à l'aideàde deux boulons Assemblez (5a) et fixez-les ensemble l'aide de(2) deux (2) partiellement filetés de 5", de quatre (4) rondelles plates et de deux (2) contre-écrous Nyloc (5b). boulons partiellement filetés de 5 po, de quatre (4) rondelles plates et de deux (2) écrous de blocage nyloc (5b).
8 MontezMontez le treuil le à l'aide trois (3) filetés de 3 po, (6) rondelles contre-écrous treuilde à l'aide deboulons trois (3)partiellement boulons partiellement filetés de 3", deplates, six (6)(3)rondelles platesnyloc. et de trois (3) contre-écrous Nyloc.