Installation Manual Se, JK0089 — iP REE R en TEST me @ op Infarction RU TREATING Sel RRO RESETTING Sel
J i This product has been inspected Before installing the production, 1 and debugged by the factory fo I 11 please be sure to remove | the best condition. Please do not sundries and sludge from the | dissembler and assemble it 11 water pipe to prevent sundries yourself. i | ‘from blocking the product.
1, Connect the straight tube 2. Resew the shower head into 3. Prepare water inks decorative tube and bolts the connecting pipe, then like the drawing below. holder to inlet ube then connect the connecting pips screw the inlet tube to main fo the main body, and screw the boy. main body to the straight pipe. SRT Connected inlet tube 5. Twister bolts holder &. Drill holes on floor fink the drawing. 5 the main body. based on the drawing. 7. Tighten the-expansion 8, Twist the shower hose fo the bolts.
425mmHB.TY = 207 RT Emm LTT KEY LL Sl P180mmE.s" In-order to keep the appearance of product clean, bright and good performance, please take care of the product as follows; 1. Ringe with water only and dry with doff cotton cloth; 2.Use mild fig quid and colorless glass cleaner to remove surface dirt:and scale film, or use polish without abrasive effect; 3.Do not use abrasive detergent, polish, emery cloth, paper towel or scraper, ete; 4.