User Guide

Prepare the user to start using eye tracking by positioning them comfortably. If they use
glasses, make sure that they are wearing them and that the lenses are clean.
Place the TD Pilot on your mounting system or a stable surface in front of the user at, or
slightly below, their eye level. If their head is tilted left or right, tilt the TD Pilot to match. It
is important that the angle of the screen surface match the angle of the user’s face. Most
users, when seated at a table or desk, will need to have the TD Pilot positioned higher
than the table surface.
You may need to refine the position of the device during the Calibrate steps on the next
page. Always adjust the position of the device to suit the user, not the other way around.
Note: A mounting system is the best
option for precise device positioning that is
easy to adjust throughout the day. Several
mounting options are available, including
floor mounts, desk mounts, and wheelchair
mounts. Visit TobiiDynavox.com or
contact your local Tobii Dynavox partner.
Mount and Position