Safety Data Sheet Titebond SB All Purpose Construction Adhesive Section 1. Identification GHS product identifier : Titebond SB All Purpose Construction Adhesive Physical state : Liquid. Address Contact person : Franklin International 2020 Bruck Street Columbus OH 43207 : Franklin Technical Services Telephone : (800) 877-4583 In case of emergency : Franklin Security (614) 445-1300 : SDS@FranklinInternational.
Titebond SB All Purpose Construction Adhesive Section 2. Hazards identification Signal word : Danger Hazard statements : Highly flammable liquid and vapor. Causes skin irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. (inhalation) Causes damage to organs through prolonged or repeated exposure.
Titebond SB All Purpose Construction Adhesive Section 4. First aid measures Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Titebond SB All Purpose Construction Adhesive Section 4. First aid measures Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. See toxicological information (Section 11) Section 5.
Titebond SB All Purpose Construction Adhesive Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Avoid exposure obtain special instructions before use. Avoid exposure during pregnancy. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with adequate ventilation.
Titebond SB All Purpose Construction Adhesive Section 8. Exposure controls/personal protection STEL: 500 ppm 15 minutes. STEL: 1225 mg/m³ 15 minutes. OSHA PEL (United States, 5/2018). TWA: 400 ppm 8 hours. TWA: 980 mg/m³ 8 hours. Biological exposure indices No exposure indices known. Appropriate engineering controls : Use only with adequate ventilation.
Titebond SB All Purpose Construction Adhesive Section 9. Physical and chemical properties The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated. Appearance Physical state : Liquid. [Paste.] Color : Beige. Odor : Alcohol-like. : Not available. Odor threshold pH Melting point/freezing point : Not applicable. : Not available. Boiling point, initial boiling point, and boiling range : 61.
Titebond SB All Purpose Construction Adhesive Section 10. Stability and reactivity Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced. Section 11. Toxicological information Information on toxicological effects Acute toxicity Product/ingredient name Result Species n-hexane LC50 Inhalation Gas.
Titebond SB All Purpose Construction Adhesive Section 11.
Titebond SB All Purpose Construction Adhesive Section 11. Toxicological information Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure Potential immediate : Not available. effects Potential delayed effects : Not available. Long term exposure Potential immediate effects : Not available. Potential delayed effects : Not available. Potential chronic health effects Not available.
Titebond SB All Purpose Construction Adhesive Section 12. Ecological information Soil/water partition coefficient (KOC) : Not available. Other adverse effects : No known significant effects or critical hazards. Section 13. Disposal considerations Disposal methods : The generation of waste should be avoided or minimized wherever possible.
Titebond SB All Purpose Construction Adhesive Section 14. Transport information Section 15. Regulatory information U.S. Federal regulations SARA 302/304 Composition/information on ingredients No products were found. SARA 304 RQ : Not applicable.
Titebond SB All Purpose Construction Adhesive Section 15. Regulatory information Pennsylvania : The following components are listed: 2-PROPANOL California Prop. 65 WARNING: This product can expose you to n-Hexane, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Ingredient name No significant risk level Maximum acceptable dosage level n-hexane - Yes.
Titebond SB All Purpose Construction Adhesive Section 16. Other information References as modified by the Protocol of 1978. ("Marpol" = marine pollution) UN = United Nations : Not available. Indicates information that has changed from previously issued version. Notice to reader To the best of our knowledge, the information contained herein is accurate.