Safety Data Sheet Titebond All-Siding Caulk -Cedar Section 1. Identification GHS product identifier : Titebond All-Siding Caulk -Cedar Physical state : Liquid. Address Contact person : Franklin International 2020 Bruck Street Columbus OH 43207 : Franklin Technical Services Telephone : (800) 877-4583 In case of emergency : Franklin Security (614) 445-1300 : SDS@FranklinInternational.
Titebond All-Siding Caulk -Cedar Section 2. Hazards identification Prevention Response : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Do not breathe vapor. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. : IF exposed or concerned: Call a POISON CENTER or physician. Storage : Store locked up.
Titebond All-Siding Caulk -Cedar Section 4. First aid measures Eye contact : This product may irritate eyes upon contact. Inhalation : No known significant effects or critical hazards. Skin contact : Defatting to the skin. May cause skin dryness and irritation. Ingestion : No known significant effects or critical hazards. Over-exposure signs/symptoms Eye contact : No specific data.
Titebond All-Siding Caulk -Cedar Section 6. Accidental release measures Personal precautions, protective equipment and emergency procedures For non-emergency personnel : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Titebond All-Siding Caulk -Cedar Section 8. Exposure controls/personal protection Control parameters Occupational exposure limits Ingredient name Exposure limits Stoddard solvent ACGIH TLV (United States, 3/2017). TWA: 100 ppm 8 hours. TWA: 525 mg/m³ 8 hours. OSHA PEL 1989 (United States, 3/1989). TWA: 100 ppm 8 hours. TWA: 525 mg/m³ 8 hours. NIOSH REL (United States, 10/2016). TWA: 350 mg/m³ 10 hours. CEIL: 1800 mg/m³ 15 minutes. OSHA PEL (United States, 6/2016). TWA: 500 ppm 8 hours.
Titebond All-Siding Caulk -Cedar Section 8. Exposure controls/personal protection Respiratory protection : Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use. Section 9. Physical and chemical properties Appearance Physical state : Liquid. [Paste.] Color : Not available.
Titebond All-Siding Caulk -Cedar Section 11.
Titebond All-Siding Caulk -Cedar Section 11. Toxicological information Symptoms related to the physical, chemical and toxicological characteristics Eye contact : No specific data.
Titebond All-Siding Caulk -Cedar Section 12.
Titebond All-Siding Caulk -Cedar Section 14. Transport information Additional information DOT Classification : Reportable quantity 1010.1 lbs / 458.59 kg [86.533 gal / 327.56 L]. Package sizes shipped in quantities less than the product reportable quantity are not subject to the RQ (reportable quantity) transportation requirements. Special precautions for user : Transport within user’s premises: always transport in closed containers that are upright and secure.
Titebond All-Siding Caulk -Cedar Section 15. Regulatory information New York : The following components are listed: Butyl benzyl phthalate; Ethylene glycol New Jersey : The following components are listed: BUTYL BENZYL PHTHALATE; 1, 2-BENZENEDICARBOXYLIC ACID, BUTYL PHENYLMETHYL ESTER; ETHYLENE GLYCOL; 1,2-ETHANEDIOL; STODDARD SOLVENT : The following components are listed: 1,2-BENZENEDICARBOXYLIC ACID, BUTYL PHENYLMETHYL ESTER; 1,2-ETHANEDIOL; STODDARD SOLVENT Pennsylvania California Prop.
Titebond All-Siding Caulk -Cedar Section 16. Other information Flammability 0 Health 2 0 Instability/Reactivity Special Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.