Safety Data Sheet Titebond PROvantage Landscape Adhesive Section 1. Identification GHS product identifier : Titebond PROvantage Landscape Adhesive Product type : Liquid. Address Contact person : Franklin International 2020 Bruck Street Columbus OH 43207 : Franklin Technical Services Telephone : (800) 877-4583 In case of emergency Product code : Franklin Security (614) 445-1300 : 3121 Date of revision : 5/22/2015. Print date : 5/23/2015.
Titebond PROvantage Landscape Adhesive Section 2. Hazards identification Prevention Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Titebond PROvantage Landscape Adhesive Section 4. First aid measures Description of necessary first aid measures Eye contact Inhalation Skin contact Ingestion : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. If necessary, call a poison center or physician. : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Titebond PROvantage Landscape Adhesive Section 4. First aid measures Indication of immediate medical attention and special treatment needed, if necessary Notes to physician Specific treatments Protection of first-aiders : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. : No specific treatment. : No action shall be taken involving any personal risk or without suitable training.
Titebond PROvantage Landscape Adhesive Section 6. Accidental release measures Large spill : Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g.
Titebond PROvantage Landscape Adhesive Section 8. Exposure controls/personal protection TWA: 610 mg/m³ 8 hours. ACGIH TLV (United States, 4/2014). Absorbed through skin. TWA: 200 ppm 8 hours. TWA: 262 mg/m³ 8 hours. STEL: 250 ppm 15 minutes. STEL: 328 mg/m³ 15 minutes. OSHA PEL 1989 (United States, 3/1989). Absorbed through skin. TWA: 200 ppm 8 hours. TWA: 260 mg/m³ 8 hours. STEL: 250 ppm 15 minutes. STEL: 325 mg/m³ 15 minutes. NIOSH REL (United States, 10/2013). Absorbed through skin.
Titebond PROvantage Landscape Adhesive Section 8. Exposure controls/personal protection Appropriate engineering controls : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Titebond PROvantage Landscape Adhesive Section 9. Physical and chemical properties VOC (less water, less exempt solvents) : 7 g/l Relative density : 1.306 Solubility : Insoluble in the following materials: cold water and hot water. Section 10. Stability and reactivity Reactivity : No specific test data related to reactivity available for this product or its ingredients. Chemical stability : The product is stable.
Titebond PROvantage Landscape Adhesive Section 11. Toxicological information Eyes : This product may irritate eyes upon contact. Respiratory : High vapor concentrations can cause headaches, dizziness, drowsiness and nausea and may lead to unconsciousness. Specific target organ toxicity (single exposure) Name Category Route of exposure Target organs methyl acetate Category 3 Not applicable.
Titebond PROvantage Landscape Adhesive Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure methyl acetate Acute LC50 408000 µg/l Fresh water 96 hours methanol Acute EC50 16.
Titebond PROvantage Landscape Adhesive Section 14. Transport information DOT Classification TDG Classification Mexico Classification ADR/RID IMDG IATA UN number 1133 1133 1133 1133 1133 1133 UN proper shipping name FLAMMABLE LIQUID, N.O.S. (methyl acetate) FLAMMABLE LIQUID, N.O.S. (methyl acetate) FLAMMABLE LIQUID, N.O.S. (methyl acetate) ADHESIVES, containing flammable liquid FLAMMABLE LIQUID, N.O.S.
Titebond PROvantage Landscape Adhesive Section 15. Regulatory information SARA 302 TPQ SARA 304 RQ Name % EHS (lbs) (gallons) (lbs) (gallons) vinyl acetate 0.1 - 0.5 Yes. 1000 129 5000 644.8 SARA 304 RQ : 2658262.3 lbs / 1206851.1 kg [244116.
Titebond PROvantage Landscape Adhesive Section 15. Regulatory information This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all the information required by the Controlled Products Regulations. Mexico Classification : 3 Health 2 Flammability 0 Reactivity Special International regulations International lists : Australia inventory (AICS): All components are listed or exempted.
Titebond PROvantage Landscape Adhesive Section 16. Other information Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only.