Instructions / Assembly

Important Notice: Our recommendations, if any, for the use of this pr
oduct ar
e based on tests believed to be r
eliable. Since the use of this product is beyond the control of
the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or ef
fects incidental to such use, handling or possession or the r
esults to be
obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained
herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-GLUE
www.titebond.com
Application
Guidelines
Physical
Properties
(Typical)
Application temperature Above 47°F.
Open assembly time 10 minutes (70°F./50%RH)
Total assembly time 20-25 minutes (70°F./50%RH)
Minimum required spread Approximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally
, 100-150 psi for
softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application Plastic bottles for fine applications; glue may also be spr
ead with a roller
spr
eader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
T
ype
Advanced Pr
oprietary Polymer
State Liquid
Color Tan
Dried film Light Br
own
Solids 52%
Viscosity 4,200 cps
pH 2.5
Calculated VOC: 5.6 g/L
Weight/gallon 9.22 lbs.
Chalk temperature*
Approx. 47°F.
Flashpoint >200
°F.
Freeze/thaw stability Stable
Storage life 12 months in tightly closed containers
at 75
°F.
© 2007 Franklin International.
All rights r
eserved. (Rev. 01/07)
Titebond
®
III
Ultimate Wood Glue
Units per Packages
Cat. No. Size Package Weight per Pallet
1411 1.25 oz. Bottle 50 6 160
1412 4 oz. Bottle 12 5 270
1413 8 oz. Bottle 12 8 160
1414 16 oz. Bottle 12 16 100
1415 Quart Bottle 6 16 88
1416 Gallon Jug 2 20 63
1417 5 Gallon Plastic Pail
1
52 24
1418 55 Gallon Drum 1 559 4
Patent Pending
Ordering
Information
Limitations
Titebond III Ultimate Wood Glue is not for continuous submersion or for use below the waterline.
Not for structural or load bearing applications. Do not use when temperature, glue and materials are
below 47°F. Store product below 75°F. Storage above this temperature may cause product to thicken
and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard
surface until pr
oduct is r
estor
ed to original form. Because of variances in the surfaces of treated
lumber
, it is a good idea to test for adhesion. Read MSDS befor
e use. KEEP FROM FREEZING.
KEEP OUT OF THE REACH OF CHILDREN.
Product
Features
• Passes ANSI/HPVA Type I water-resistance
• Waterproof formula that cleans up with water
• Superior strength – strong initial tack
• Designed for interior and exterior applications
• Longer open assembly time
• Lower application temperature
• Unaffected by finishes
• FDA approved for indirect food contact
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials
can be during application, to assure a good bond.
Bond
Strength
ASTM D-905
(on hard maple)
Temperature Strength psi % wood failure
Room Temperature 4,000 57