Osakf OS 3700 Instruction Manual
Thank you for purchasing the OS 3700 Massage Chair. Before using your massage chair, please read the contents of this instruction manual and refer to it when needed. Contents Safety Precautions ........................................................................ 1-2 Chair Components ........................................................................ 3-4 Chair Installation & Moving............................................................ 5-6 Grounding Instructions ...............................
m Safety Precautions When using the massage chair, basic precautions should always be followed to reduce the risk of electric shock, bums, fire or injury to persons. Please read the following precautions before using the massage chair. • Make sure the power plug is securely inserted into a proper electrical outlet to reduce the risk of short-circuit and fire. • Make sure the power plug is securely inserted into a proper electrical outlet to reduce the risk of short-circuit and fire.
• This massage chair is designed for household use and should not be used in non-residential settings. • Please consult your doctor if you are in doubt as to whether or not you should use this massage chair.
m Chair Components Pillow Pad Backrest Controller Shoulder Backrest Pad Legrest Side Board 3
Massage Position 2 Air bags 4 Air bags 2 Heat 1 Vibration 10Air bags 4 Air bags 2 Footroller I Air bag 4 - Heat Foot Roller («· Vibration I
[D Chair Installation & Moving Ensure sufficient spaces around massage chair, please leave 15" of spaces behind the backrest and 10" of spaces at the front of massage chair. Step 1: Remove the chair out of the carton. Step 2: Connect the wire plug and then connect to the power supply. Turn the switch to "1° position. The massage chair will return to the original position.
Note: The back pad is installed with an additional pad to soften the massage.If you desire a stronger massage simply remove the extra pad and proceed to zippering the pad to the top of the backrest. Moving the chair: Lift up the footrest then recline the chair to approximate 45°to easily move the chair around the house with a slight pull or push Caution! 1. Before moving the chair, please put the foot rest back into the original position. Otherwise, injuries might occur inthe process of moving. 2.
mJ Grounding Instructions This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
m Chair Specifications I -.! -,J.,".'1-•lf llll]II Model No. - --1-.u1.,..-... 111•1u•,-, OS 3700 Rated Voltage 11ov-12ov Rated Frequency 50/60Hz Rated Power Consumption 120W Timer 5/10/15/20/25/30 minutes Max Time Rate 30 minutes Upright:61.4 x29.5"x46.1" Dimensions(L x W x H) Reclined:77.2"x29.5"x27.6" Carton:74.0"x30.3Rx34.0R Gross Weight: 213.8 lbs Weight Net Weight: 191.8 lbs Controller wire: 59.0" Length of Wire Power supply wire: 70.
m Controller Diagram 1. Power 2. Timer 3.Pause 4-7. Auto Programs 8. Calves Air 9. Arms Air 10-11. Width 12-13. Position 14. Vibration 15. Heat 16. Spot/Partial 17. Intensity 18.Speed 19. Relax Position 20. Roller 1210 -- 21. Footrest Lift 22. Footrest Drop 23. Recline 24. Incline 25. Kneading 26. Tapping 27. Shiatsu 28.
mJI Operation Guide How to Start 1. Connect the power plug to the power supply. 2. Tum the switch on at the back of the chair. 3. Massage chair will be in idle mode until the functions below are activated: • Power • Pause • Footrest extension • Recline (includes backrest and footrest) Function Description 1.Power • Starts and stops all functions of the massage chair. • Press once. Remote control will light up and chair will be in idle mode.
4. Deep Tissue • Engages the full body deep tissue massage. This program focuses on neck, shoulder, waist and hip. • Relief of a day's work pressure. 5.Body Stretch • Engages the full body stretching auto program. This program stretches the back muscles, hands, hamstrings and the full body. • Use this program after a workout to relax sore muscles. 6.Calm • Engages the Calm Auto Program. • This is a gentle massage mode, relieves body pain. • Relieves body aches and suitable for the elderly. 7.
12113. A /11" Position • Adjust back massage position. • Press A or 11" to choose position of massage rollers when a "beep" sound alerts in 1O seconds. • Release the button once the desired position is achieved. Note:This can also be used during sector massages. 14. Vibration • Prass this button once to activate the seat vibration function. Press the button again to stop the seat vibration function. • The vibration mode can be switched on or off while any of the programs are running. 15.
19. Relax Position • Adjust the angle of the massage chair to a comfortable position. • Press to achieve position required. • Press again to resume to original position. 20. Foot Roller (Roller) • Press once, to activate the foot roller massage. • Press again, to stop the foot roller massage. 21/22. Footrest lift I drop • Allows you to lift or drop the footrest. • Press once and the footrest will start to lift/drop. • Press again to slop the footrest at your preferred angle. 23/24.
27. Shiatsu • Press this button once to activate the shiatsu function for a continuous full back massage. Press again to stop the shiatsu function. • Shiatsu width and speed can be adjusted by pressing "Width" and "Speed" button respectively after activating shiatsu function. • Shiatsu function can be combined with kneading function. 28. Rolling • Press this button once to activate the rolling function for a full back massage. Press again to stop the rolling function.
mJ Troubleshooting This page summarizes the most common problems you could encounter with the product. If you are unable to solve the problem with the information below, contact service center immediately. If the problem encountered is not listed, please try the following suggestions: 1. Turn off the product and unplug it. 2. Wait for 60 minutes. 3. Plug the product back to the mains and restart. 4. If the problem persists, contact the authorized service center.
rmJ Care & Maintenance Cleaning Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. When wiping down the chair use non toxic cleaners and be sure the cloth is moist and NOT wet. Do not immerse to appliance in water. 1. Remove the main plug from the wall socket. 2.Clean the control panel and cords with a dry cloth. 3.Do not use a moist cloth or a cleaning agent. Storing 1.Disconnect the product from the power source after use. 2.