Operation Manual

MyPBX Standard User Manual
www.yeastar.com Page 116
6.1.1 Sample Routing via PSTN Trunk
Let‟s route all inside extensions through an analog trunk by dialing 9. In
Outbound Routes, add a new outbound route as below.
Figure 6-1
As we can see from the outbound route of „pstnout‟, all phone numbers
starting with 9 will have their first digit stripped off (digit 9) and will be sent
to the PSTN (port 1-2).
After we have configured the above, we can dial 9 + local number to dial out
via a PSTN line.
Note: Setting number prefix to wild card X and setting Strip to 0 digits from
the front will allow all calls to go through this outbound route.