RV34G/NV34W Please keep the boxes if you need return; Check before installation; Return won’t be accepted afterwards; Cross Screwdriver Hammer Tapeline Pencil Electric Drill Glass Cement Levelling Rod Electric Drill 1h
Structural Diagram Spare Parts List H1 H2 x36 x47 (φ4× 14mm) H3 B4 (φ6× 40mm) H4 H5 x8 x47 x47 M1 P2 S2 (φ8× 40mm) H6 H7 H8 x3 x4 (φ4× 20mm) (Hole distance:96mm) H9 x2 x2 x2 (φ4× 35mm) (φ4× 50mm) H13-S H12 x2 (φ8× 40mm) P3 H11 H10 (Big bend) S5 x2 H13-M (12 Inches) H14 x4 x4 B1 S1 P1 S1 B2 (φ4× 6mm) B3 S3 H15 P4 x2 (φ6× 30mm) D2 S4 B3 D1 P1 S4 P4 S3 D2 P2
1 2 Side Board Installation Slider Installation 1 H2 2 x20 (φ6× 40mm) S1 H6 x4 H6 44 3 H6 H6 H2 S2 55 H6 H13-M H6 P3 Slider Disassemble H13-S P4
3 4 Slider Installation H1 Neutral Board Installation x6 H2 (φ4× 14mm) H1 H13-M (φ6× 40mm) P1 H3 H13-M H3 x2 H13-M H1 P2 H1 Back x6 (φ8× 40mm) (12 Inches) H1 x5 H1 H13-M H3 Front P3 NO ELECTRIC SCREW DRIVER H3 S2 B1 H3 P5 P6
6 Neutral Board Installation H3 x2 H4 H4 x3 H5 x3 P2 (φ8× 40mm) S5 Neutral Board Installation x2 S5 S5 H5 H3 x2 P1 H4 H5 P3 B1 B1 NO ELECTRIC SCREW DRIVER P7 NO ELECTRIC SCREW DRIVER P8
7 8 Slider Installation Structure Installation P2 P2 H1 P1 x6 P1 P3 H4 x10 H5 x10 (φ4× 14mm) S5 H13-M x2 (12 Inches) S5 B1 P3 B1 H1 B2 NO ELECTRIC SCREW DRIVER H13-M H1 H13-M Back S1 Front NO ELECTRIC SCREW DRIVER P9 P10
9 10 Structure Installation Drawer Installation 1 H2 S2 H4 H2 x10 x16 (φ6× 40mm) H5 x10 D2 P2 P3 P1 S5 B1 2 S4 S1 B2 S3 NO ELECTRIC SCREW DRIVER P11 P12
11 1 12 Drawer Installation Slider Installation S4 P4 H7 D2 H4 H14 x16 B3 S3 H13-S S3 S4 x16 H1 x12 (φ4× 14mm) B3 H5 H1 P4 H7 x2 (Hole distance:96mm) H13-S H14 x4 (φ4× 6mm) H5 H4 2 P4 S4 NO ELECTRIC SCREW DRIVER H13-S x4 (12 Inches) NO ELECTRIC SCREW DRIVER B3 D2 P13 S3 Back Front P14
13 14 Top Installation B4 H2 H2 H2 Cabinet Installation H12 x6 (φ6× 40mm) H11 S2 H12 H5 H4 H5 H4 H4 x6 H5 x6 H11 S2 P2 S5 S1 P1 S1 B1 B1 H11 B2 x2 (φ4× 50mm) NO ELECTRIC SCREW DRIVER x2 H12 (φ8× 40mm) 1 2 3 H12 P15 H12 P16
15 Drawer Installation 16 Hinge Installation H8 x2 (φ4× 20mm) H1 B4 x4 H9 (φ4× 14mm) H7 x2 (Big bend) x1 (Hole distance:96mm) S1 B1 H1 NO ELECTRIC SCREW DRIVER H1 H9 H9 H13-M H8 D1 H13-S P17 H7 P18
17 Door Adjustment Hinge Installation H9 H9 H1 H1 x8 (φ4× 14mm) H1 Adjust the screw to make the door lean to forward or back NO ELECTRIC SCREW DRIVER B4 Adjust the screw to make the door lean to left or right S1 Adjust the screw to make the door lean to up or down P19 P20
18 Mirror Installation 4 H10 × 2 1 H10 x2 (φ4× 35mm) H10 B4 S1 B4 S1 H15 x2 (φ6× 30mm) 5 2 3 H15 H15 B4 S1 P21 × 2 H15 B4 M1 S1 P22
