- HARDWARE USER MANUAL - MANUEL DE L'UTILISATEUR HARDWARE - HARDWARE-BENUTZERHANDBUCH - HARDWAREHANDLEIDING - MANUALE D’USO HARDWARE - MANUAL DEL USUARIO DEL HARDWARE - MANUAL DO UTILIZADOR DO HARDWARE - РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ ПО ТЕХНИЧЕСКОМУ ОБЕСПЕЧЕНИЮ - 取扱説明書 - 硬件用户手册
Compatible: PC Hardware User Manual 1/18
U.S. Air Force A-10C attack aircraft HOTAS™(**) (Hands On Throttle And Stick) replica joystick pack, including: 1 Replica JOYSTICK • Innovative new H.E.A.R.
Dual Replica THROTTLES • Innovative new H.E.A.R.
CONFIGURATION OF BUTTONS AND AXES On the JOYSTICK: 4/18
On the THROTTLE: 5/18
On the CONTROL PANEL: 6/18
“A-10C” AIRCRAFT FUNCTIONS On the JOYSTICK: 7/18
On the THROTTLE: 8/18
On the CONTROL PANEL: 9/18
REALISTIC IDLE AND AFTERBURNER DETENTS The HOTAS Warthog’s throttle features realistic systems for IDLE and AFTERBURNER detents (the AFTERBURNER system is disengageable). IDLE: When set to IDLE: to cut off the aircraft’s motors (in compatible games), raise the throttle levers slightly (in order to get over the stop) and put the throttle levers into the OFF position. To power the motors back on, simply push the throttle levers forward (and then slightly down), into the IDLE position.
AFTERBURNER: When the AFTERBURNER module stop is in place, raise the throttle levers slightly (in order to get over the stop) and push them forward. INSTALLING/UNINSTALLING THE AFTERBURNER STOP: (By default, the AFTERBURNER module stop is not installed). - Using the included Allen Key, unscrew the 2 screws as shown below, and take out the removable bar located between the 2 throttle levers.
- Take out the AFTERBURNER module, located underneath the removable bar: (In this position, the AFTERBURNER stop is disabled) 12/18
- Turn the module upside down and put it back in its place: (In this position, the AFTERBURNER stop is now enabled) - Put the removable bar back between the 2 throttle levers, then replace and re-tighten the 2 screws. IMPORTANT NOTE: In order to avoid any possible damage to the AFTERBURNER module, you must never use the throttle levers without the removable bar properly installed (using the 2 screws) between the 2 throttle levers.
ATTACHING/SEPARATING THE 2 THROTTLE LEVERS To attach the throttle levers together: To detach the throttle levers from one another: 14/18
INSTALLING THE JOYSTICK IN A COCKPIT OR OTHER FIXED SUPPORT To attach the joystick in a cockpit: - Unscrew the 4 screws located underneath the joystick’s metal base plate, and remove the metal base plate. - Use the 4 screw threads located on the underside of the joystick to attach the joystick directly to your fixed support. You can also use the 4 holes located in the corners of the metal base plates of the joystick and the throttle to attach both elements to a fixed support.
BACKWARDS-COMPATIBILITY The new “HOTAS Warthog” handle is backwards-compatible with the base of the “HOTAS Cougar” (and vice versa). Only the CMS push button (button 19) will be non-functional, as it was not originally featured on the HOTAS Cougar. CONTROL PANEL BACKLIGHTING The intensity of the control panel's backlighting can be adjusted directly via T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical EdiTor).
material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) if the product has been used for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example); (3) in the event of failure to comply with the instructions provided by Tec
COPYRIGHT © 2017 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. Windows® is a registered trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another. Made in China.
