service@thorgroup.us +1 877-288-8099 THOR KITCHEN OUTDOOR Corner Cabinet Installation Manual MODEL# MK06SS304 IMPORTANT: Save for electrical inspector’s use. Installer: Leave installation instructions with the homeowner.
service@thorgroup.us +1 877-288-8099 Welcome Thank you for purchasing your Thor Kitchen Appliance! We appreciate your business and we recommend that you read this entire User’s Manual before operating your new appliance for the first time. This manual contains instructions on how to properly install and set up your new range, as well as insights into the unique features that our product offers.
service@thorgroup.
service@thorgroup.us +1 877-288-8099 Parts List If you are missing any part, please contact Thor Kitchen Customer Service Department at 877-288-8099 at business hours, or email service@thorgroup.us for help. Explosive # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Part # Part Name Quantity 20.01.008054-000-A0 20.01.001063-000-A0 22.99.009228-000-A0 20.01.001059-000-A0 20.01.001060-000-A0 20.01.001064-000-A0 20.01.008077-000-A0 05.01.008004-000-A0 05.10.000122-000-A0 05.10.000123-000-A0 20.01.
service@thorgroup.
service@thorgroup.us +1 877-288-8099 Cabinet Installation Step 1 1. Reverse the bottom welding part (Part # 7) and put 1 pc supporting leg (Part # 8) to Part # 7. Use hand to adjust the leg to the suitable position; 2. Use 16 pcs ¼” flat Philip’s head screw (Part #17) to connect 2 pcs fixed casters (Part # 9) and 2 pcs universal casters with brake (Part # 10) to Part #7; 3. Reverse Part # 7 and use 2 pcs Philips thumb head screw (Part # 18) to install Door barrier strip (Part # 18) to Part # 7.
service@thorgroup.us +1 877-288-8099 Step 2 1. Use 3 pcs ¼” flat Philip’s head screw (Part # 17) to connect left side panel A (Part # 4) to Part # 5; 2. Use 3 pcs ¼” flat Philip’s head screw (Part # 17) to connect right side panel a (Part # 12) to Part # 11; 3. Do not over-tighten all the screws until parts are lined up.
service@thorgroup.us +1 877-288-8099 Step 3 1. Use 6 pcs ¼” flat Philip’s head screw (Part # 15) to connect front panel (Part # 6) to Part #5 and #11. Do not over-tighten all the screws until parts are lined up.
service@thorgroup.us +1 877-288-8099 Step 4 1. Use 4 pcs Philips thumb head screw with anti-slip design (Part # 17) to connect Left side panel A welding assembly (Part # 4) and Left side panel B welding assembly (Part # 5) to Bottom panel welding assembly (Part # 7); 2. Use 4 pcs Part # 17 to connect Right side panel B welding assembly (Part # 11) and Left side panel A welding assembly (Part # 12) to Part # 7; 3. Use 2 pcs Part 17 to connect Front panel welding assembly (Part # 6) to Part # 7. 4.
service@thorgroup.us +1 877-288-8099 Step 5 1. Use 4 pcs Part # 17 to connect Beam welding assembly (Part # 14) to Part # 4 and Part # 12. Do not over-tighten all the screws until parts are lined up.
service@thorgroup.us +1 877-288-8099 Step 6 1. Install 2 pcs Laminate welding holder (Part # 15) to Part # 4 and Part # 12, and then install Laminate welding assembly (Part # 2) on the top; 2. Use 16 pcs flat head screw (Part # 19) to install Door welding assembly (Part # 3) to Part # 4 and Part # 12. 3. Do not over-tighten all the screws until parts are lined up.
service@thorgroup.us +1 877-288-8099 Step 7 1. Make sure Part # 2 is installed inside the cabinet first; 2. Use 10 pcs Part # 17 to Connect Countertop welding assembly (Part # 1) with Part # 4, # 5, # 6, # 11 and # 12. Do not over-tighten all the screws until parts are lined up.
service@thorgroup.
service@thorgroup.
