service@thorgroup.us +1 877-288-8099 Outdoor Grill Cabinet Installation Manual MODEL# MK04SS304 Thor Kitchen Outdoor BBQ Grill (MK03SS304 for Cabinet) IMPORTANT: Save for electrical inspector’s use. Installer: Leave installation instructions with the homeowner.
service@thorgroup.us +1 877-288-8099 Warnings These are the most critical warnings summarized below. ***WARNING*** • If the instructions in this manual are not followed exactly, a fire or explosion may result, causing property damage, personal injury or death. • Do not store or use gasoline or other flammable substances and liquids near this or other appliance, • Installation of this appliance must be done by a qualified, service agency or gas supplier.
service@thorgroup.us +1 877-288-8099 Welcome Thank you for purchasing your Thor Kitchen Appliance! We appreciate your business and we recommend that you read this entire User’s Manual before operating your new appliance for the first time. This manual contains instructions on how to properly install and set up your new range, as well as insights into the unique features that our product offers.
service@thorgroup.us +1 877-288-8099 Parts Explosive Pictures If you are missing any part, please contact Thor Kitchen Customer Service Department at +1 877-2888099 at business hours, or email service@thorgroup.us for help. Please provide your proof of purchase for warranty verification.
service@thorgroup.
service@thorgroup.us +1 877-288-8099 Parts List Explosive # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Part # Part Name Quantity 22.99.008092-000-A0 05.99.008024-000-A0 08.01.008041-000-A0 12.02.000070-000-A0 04.01.008107-000-A0 07.04.008001-000-A0 13.99.008002-000-A0 05.99.008011-000-A0 22.99.009207-000-A0 06.07.008002-000-A1 07.14.008001-000-A0 04.01.008057-000-A0 04.03.008002-000-A1 22.99.009209-000-A0 07.07.008004-000-A0 07.06.008003-000-A0 14.01.008001-000-A0 11.01.008001-000-A0 05.07.
service@thorgroup.us +1 877-288-8099 36 37 04.01.008051-000-A0 10.05.008002-000-A0 flame tamer Back broil burner orifice - LP 3 1 38 20.01.008014-000-A1 flame transferring welding plate 2 39 10.09.008004-000-A0 Back broiler burner electrode 1 40 04.01.008060-000-A1 Back broiler burner protection cover 1 41 42 43 44 45 07.04.008002-000-A0 10.99.008001-000-A0 04.01.008053-000-A0 10.99.008002-000-A0 20.01.
service@thorgroup.us +1 877-288-8099 67 20.01.008083-000-A0 Left side panel B welding assembly 1 68 20.01.008085-000-A0 Back Panel B welding assembly 1 69 20.01.008081-000-A0 Right side panel B welding assembly 1 70 06.10.000022-000-A0 5/32“Philips thumb head screw 52 71 06.02.000093-000-A0 72 73 74 75 76 06.11.008056-000-A0 09.01.008008-000-A0 09.04.008003-000-A0 09.01.008007-000-A0 12.01.
service@thorgroup.
service@thorgroup.
service@thorgroup.us +1 877-288-8099 Cabinet Installation Step 1 1. Flip the bottom base welding assembly (Part #49) so in order to install legs and casters 2.
service@thorgroup.us +1 877-288-8099 Step 2 1. Flip back the bottom base after casters and legs are installed; 2. Use 4 pcs 5/32” *8 flat head screw (Part # 72) to connect Tank bottom support (Part # 59) to bottom base welding assembly (Part # 49); 3.
service@thorgroup.us +1 877-288-8099 Step 3 1. Use 6 pcs 1/4“*14 Philips thumb head screw with anti-slip design (Part #71) to Left side panel A welding assembly (Part #46) and Right-side panel A welding assembly (Part # 61) to bottom base welding assembly (Part #49); 2.
service@thorgroup.us +1 877-288-8099 Step 4 1. Use 4 pcs 5/32” *8 flat head screw (Part # 72) to install American-standard transformer (Part # 27) on Back panel A welding assembly (Part # 63); Do not break the power plug on the bottom and the buckle on the top. 2.
service@thorgroup.
service@thorgroup.us +1 877-288-8099 Step 5 1. Use 3 pcs 1/4“*14 Philips thumb head screw with anti-slip design (Part #71) to install Back panel A welding assembly (Part # 63) to bottom base welding assembly (Part # 49); 2.
service@thorgroup.us +1 877-288-8099 Step 6 1.
service@thorgroup.us +1 877-288-8099 Step 7 1. Use 4 pcs 1/4“*14 Philips thumb head screw with anti-slip design (Part #71) to connect Beam welding assembly (Part # 47) with Part #46 and #61.
service@thorgroup.us +1 877-288-8099 Step 8 1. Check the edge of the middle plate of the drawer assembly (Part #52) and make sure the side with edge is facing up; otherwise you will get to wrong folding direction (see the picture below with wrong folding direction with “×”). Be careful with the folding process. 2. Use 8 pcs 5/32 flat Philip’s screw heads (Part # 70) install the bottom plate of drawer assembly (Part# 52.4) to the middle plate (Part# 52.3) 3.
service@thorgroup.us +1 877-288-8099 Step 9 1. Insert 2 pcs drawer assemblies (Part #52) into cabinet body; 2. Divide the two parts from door hinge (Part #66) and use 5/32” *8 flat head screw (Part #72) to install them to right side panel (Part #61) and cabinet door (Part #53) 3.
service@thorgroup.us +1 877-288-8099 Step. 10 1. Use 2 pcs 5/32" *8 flat head screw (Part # 72) to install laminate board (Part #65) to Left side panel A welding assembly (Part #46); 2. Use 2 pcs 5/32" *8 flat head screw (Part # 72) to install gas tank heat shield (Part #64) to Right side panel A welding assembly (Part #61) 3.
service@thorgroup.us +1 877-288-8099 Outdoor Grill Installation Step 1 1. Open the Grill cover. Remove All 3 pcs cooking racks (Part # 29) for the main burners to avoid potential damage; 2. Use 2 pcs 1/4“*14 Philips thumb head screw (Part #71) with anti-slip design (Part #71) to install motor holder (Part #12) to Grill cavity (Part #9); 3. Use 2 pcs 1/4“*14 Philips thumb head screw (Part #71) to install Rotisserie holder (Part #32) to Grill cavity (Part #9); 4.
service@thorgroup.us +1 877-288-8099 Step 2 1.
service@thorgroup.us +1 877-288-8099 Step 3 1.
service@thorgroup.
service@thorgroup.
service@thorgroup.
